*mymedicalexpo

Catalogs
Shenzhen Witleaf Medical Electronics
Invasive Blood Pressure Cardiac Output M601

Invasive Blood Pressure Cardiac Output M601

Product catalog summary

Overview
This document outlines the features and specifications of a medical device designed for invasive blood pressure (IBP) and cardiac output (CO) measurement, suitable for integration in monitoring products used in clinical settings such as ICU, CCU, and OR.

Features

Dimensions: 87mm x 45mm x 15mm
One-channel cardiac output measurement with 12 hemodynamic parameter calculations
Support for Ti related information settings and floating pipe coefficient
Configurable CO measurement time interval
Two independent IBP measurement channels for systolic, diastolic, and average blood pressure, as well as pulse rate calculation
Configurable IBP channel information, average time, zero calibration, and filter settings

Specifications

Power Supply: DC 12 V±10%
Power Consumption: ≤5W
Communication: TTL, USART
Operating Temperature: 10°C to 40°C (50°F to 113°F)
Storage Temperature: -20°C to 55°C (4°F to 131°F)

Electrical Specifications

Pulse Rate (PR): Range 25-250 bpm, Accuracy ±3 bpm or ±2%, Resolution 1 bpm
IBP: Range -50 to 350 mmHg, Accuracy ±3 bpm or ±1%, Resolution 1 mmHg
Temperature (Tb): Range 23.0-45.0°C, Accuracy ±0.5°C, Resolution 0.1°C
Cardiac Output (CO): Range 0.20-20.00 L/Min, Accuracy ±0.2 L/Min or ±5%, Resolution 0.01 L/Min

Compliance

Standard: IEC60601-2-34-2000

Sensor Characteristics

IBP Sensor: Sensitivity 5uv/mmHg/V, Impedance 300-5000Ω
CO Sensor/Tb: Sensitivity 520Ω/℃, Nominal Resistance 14KΩ

Contact Information

Address: Building A-1201, Senyang High-tech Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China
Website: www.szwitleaf.com
Tel: +86 0755-21384132
Email: [email protected]

Note: The data is subject to change without notice. Please refer to the manual for contraindications and precautions.

Catalog excerpts

Invasive Blood Pressure Cardiac Output M601-1

Invasive Blood Pressure Cardiac Output M601 Used for integration in monitoring products, suitable for applications that require invasive blood pressure and cardiac output measurement in clinical ICU / CCU / OR and other places. One-channel cardiac output measurement Carry out 12 hemodynamic parameter calculations after inputting relevant parameters Support Ti related information settings Support the setting of ﬂoating pipe coeﬃcient Support setting CO measurement time interval Two independent IBP measurement channels, including: systolic blood pressure, diastolic blood pressure, average blood pressure, pulse rate calculation Support setting IBP channel information Support setting IBP average time Support zero calibration and calibration operations of each IBP channel Support ﬁlter settings of each IBP channel For more information, please contact us: sales@szwitl

Open the catalog to page 1

Invasive Blood Pressure Cardiac Output M601-2

Accuracy: ±0.2L/Min or ±5%(Whichever is greater) Resolution: 0.01 L/Min Electical Speciﬁcation Power supply Sensor characteristics requirements IBP sensor * The data is subject to change without notice. Please refer to the manual for the contraindications and precautions Address：Building A-1201, Senyang High-tech Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China Tel：+86 0755-21384132 Email：s

Open the catalog to page 2

All Shenzhen Witleaf Medical Electronics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list