LCMS-8060NX
1 / 12Pages

Catalog excerpts

LCMS-8060NX - 1

Liquid Chromatograph Mass Spectrometer

Open the catalog to page 1
LCMS-8060NX - 3

Enhanced performance Sensitivity and Robustness LCMS-8 0 6 0 NX The LCMS-8060NX is a triple quadrupole mass spectrometer with world-class sensitivity and detection speeds. It boasts increased robustness and ease of use as well as Analytical Intelligence to maximize your laboratory's output. The culmination of Shimadzu's expertise in triple quadrupole mass spectrometry Robustness and ease of use in high sensitivity analysis Streamlined analytical process improves workflow efficiency Shimadzu Triple Quadrupole LC/MS Advancements in sensitivity • Automated support functions utilizing digital...

Open the catalog to page 3
LCMS-8060NX - 4

The Culmination of Shimadzu's Expertise in Triple Quadrupole Mass Spectrometry IonFocus ™ unit A newly-developed ESI probe with focus electrodes introduces ions into the mass spectrometer more efficiently, while expelling contaminants to reduce noise and provide more stable data. In addition, an improved heat-assist design promotes the ionization of a wide range of compounds. (Patented technology.) Simple design without cables or tubes. Remove Focus electrodes or replace easily with the "one-touch" lever. Heating gas with improved heat transfer efficiency Ions are introduced more...

Open the catalog to page 4
LCMS-8060NX - 5

UFsweeper™ Ⅲ collision cell Ultra-fast detector UFsweeper is a unique Shimadzu technology which A detector boasting ultra-fast response effectively sweeps ions from the collision cell without enables sensitive and stable signal detection deceleration. Crosstalk is virtually eliminated and even with a short pause time, dwell time and high-sensitivity analysis is maintained, even at high polarity switching time. acquisition speeds. The high-speed transport technology of UFsweeper III minimizes ion loss even at the highest data acquisition rate of 0.8 msec. Increase laboratory throughput with...

Open the catalog to page 5
LCMS-8060NX - 6

Maximized sensitivity, minimized matrix effects In the newly-developed IonFocus unit, the focus electrodes reduce sensitivity loss from matrix effects by expelling contaminants with greater efficiency. The contaminants below show an analysis example of residual pesticides in crops. Using the LCMS-8060NX's world-class polarity reversal speed (5 ms) and data capture speed (1.5 ms), stable data was obtained even for high-speed analysis of multiple components. The IonFocus unit also introduces ions into the mass spectrometer more efficiently, improving the signal intensity. Of the 100 compounds...

Open the catalog to page 6
LCMS-8060NX - 7

New AI-derived parameters optimized for a wide range of compounds The LCMS-8060NX uses new default parameters optimized for a wide range of compounds based on research with AI (Artificial Intelligence) processes, enabling excellent results without the need for labor-intensive investigation of analysis conditions. As shown below, this boosts the signal intensity for a variety of target compounds to an average of 2.6 times the intensity achieved with previous parameters. Hydrophilic compounds Uric acid Conventional parameters Efficient desolvation for higher efficiency A new heat-assisted...

Open the catalog to page 7
LCMS-8060NX - 8

Intelligent Automation Improves Workflow Efficiency The combination of the LCMS-8060NX and the Nexera™ series UHPLC provides a system with multiple Analytical Intelligence features, improving the efficiency of your entire workflow and maximizing laboratory throughput. Intelligent start-up with Smart Flow Control HPLC columns can be damaged by sudden pump starts and stops or extreme gradient changes. The Nexera automatically uses FlowPilot (Smart Flow Control) to increase the flow rate gradually to the set point. There is no need to create startup protocols for each analysis. Column...

Open the catalog to page 8
LCMS-8060NX - 9

Automatic optimization of MS conditions Simply set the sample in place and enter the sample information, and MRM and interface parameter optimization will be carried out automatically. The optimization results are shown graphically, reducing the time and effort needed for evaluation. LC/MS/MS Method Packages and MRM Libraries Several method packages are available for quick method startup. Analysis can begin right away without MRM optimization or tedious method development. Optimization of analysis conditions ■Method packages ■MRM libraries Target Residual Pesticides Veterinary Drugs Water...

Open the catalog to page 9
LCMS-8060NX - 10

Software Solutions from Acquisition to Data Review LabSolutions Connect ™ / LabSolutions Insight ™ LabSolutions Connect and LabSolutions Insight provide support for the entire analytical workflow, from optimization of MS conditions to data processing, to achieve maximum efficiency. Project file management made simple Automatically stay organized with Connect’s file management system. File locations are automatically determined by file type, enabling the technician to carry out analysis or data processing without having to remember file paths. Analyte concentrations and other sample results...

Open the catalog to page 10
LCMS-8060NX - 11

Simple method creation and batch creation LabSolutions Connect organizes optimized results in a dedicated database for easy retrieval. Simply select the target compounds from the database to create a method. Existing method files can be read into the database so that all method file information can be managed together. During the creation of sample acquisition batches, the position of vials is shown on the screen so that settings can be applied easily without risk of mistakes. The project management function prevents the user from accidentally overwriting files from a different project....

Open the catalog to page 11
LCMS-8060NX - 12

UFMS, the Analytical Intelligence logo, IonFocus, UFsweeper, UF-Qarray, UF-Lens, Nexera, LabSolutions Connect and LabSolutions Insight are trademarks of Shimadzu Corporation. For Research Use Only. Not for use in diagnostic procedures. This publication may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country. Company names, products/service names and logos used in this publication are trademarks and trade names of Shimadzu Corporation, its subsidiaries or its affiliates, whether or not they are...

Open the catalog to page 12

All Shimadzu Europa Analytical Instruments catalogs and technical brochures

  1. Tracera

    8 Pages

  2. TOC-L

    2 Pages

  3. MOC 63u

    6 Pages

  4. MOC-120H

    4 Pages

  5. GCMS-QP2010

    6 Pages

  6. MALDI-7090

    8 Pages

  7. Catalog EL

    2 Pages

  8. TOC-L Series

    2 Pages

  9. LC 2010

    3 Pages

  10. LCMS-IT-TOF

    2 Pages

  11. LCMS-2020

    14 Pages

  12. LCMS-8030

    14 Pages