- Catalogs
- SIEVE France
- IM range isolator - IM1111
IM range isolator - IM1111
1 / 2 PagesView full catalog
IM range isolator - IM1111
Product catalog summary
Field of Application
- Sterile medications
- Eye drops
- Chemotherapy
- Monoclonal antibodies
- Clinical trials
Composition
- 1 technical block with entrance airlock
- 1 isolator equipped with 1 workstation
- 1 technical block with exit airlock
Specifications of IM1111 Isolator
- Equipped with 1 workstation, sterilizable entry, and exit airlocks
- Supply voltage: 230 V single-phase
- Protection: 30 mA residual current circuit breaker - 20A Type D
- Outlet protection current: 30 mA residual current device - 16A type C
- Average power consumption: 300 W
- Maximum consumption: 1700 W
- Weight: Inlet/outlet technical unit - 183 kg, Isolator - 176 kg, Output technical unit - 117 kg, Total - 476 kg
- Ground load: 233 kg/m²
- Sound pressure during production: < 65 dB(A)
Dimensions
- Length: 2400 mm (94.49 inch)
- Width: 850 mm (33.46 inch)
- Height: 1900 mm (74.8 inch)
Electrical Specifications
- Power supply: 2 cables, minimum 3G2.5mm²
- Computer network: 3 network cables with 4 pairs (1 VPN + 1 spare + 1 per workstation)
Pneumatic Characteristics
- Pressure: 4 bars minimum
- Consumption: < 1 liter/minute
- Air quality: Clean and dry
Air Flow Characteristics
- Extraction via airlock: 50 m³/hour (Only during rinsing)
- Extraction via isolator: 100 m³/hour
Other Requirements
- Pneumatic power supply: 1 Female connector 1/4 or 1/8
- Air extraction from the isolator: 1 PVC pressure pipe Ø 63 mm
- Extraction of sterilizing agent vapors: 1 PVC pressure pipe Ø 63 mm
See more
Catalog excerpts
IM range isolator Isolator intended for handling toxic and/or sterile products. ♦ 1 technical block 1 entrance airlock ♦ 1 isolator equipped with 1 workstation ♦ 1 technical block 1 exit airlock 1 isolator equipped with: > 1 sterilizable entry airlock > 1 sterilizable exit airlock MANUDO GROUP
Open the catalog to page 1
electrical specifications: 30 mA residual current circuit breaker- 20A Type D 30 mA residual current device - 16A type C Pneumatic characteristics: _ 4 bars minimum < 1 liter / minute Clean and dry Other characteristics:
Open the catalog to page 2All SIEVE France catalogs and technical brochures
Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.