PRODUC T CATALOGUE
1 / 124Pages

PRODUC T CATALOGUE analog | digital

THE SILADENT DR. BÖHME & SCHÖPS CHRONICLE 1924 Ludwig Böhme produces the first dental gypsums in Hohenbocka/Lausitz, Eastern Germany. After WWII, his son Dr. Gerold Böhme sets up a second company, Dr. Böhme KG, in Bad Sachsa, Lower Saxony, and merges this with his father‘s company in 1989. In 1934, Carl Schöps begins producing and selling dental gypsums in Bad Sachsa/Harz. The company SILADENT-Technik GmbH is established in Munich. Adisil® becomes the first A-silicone used to make silicone duplicate moulds for investment casting, replacing the conventional gel duplicating materials....

Denture prostheses and accessories 55 - 56

PREFACE SILADENT Dr. Böhme & Schöps Our experience is your success! SILADENT is a family-operated dental company and belongs to the leading manufacturers of dental gypsums, duplicating materials, investments as well as abrasives and polishing material in Europe. We employ approx. 90 employees in 2 North German production sites. We produce dental gypsum since 1924. We offer all gypsum qualities needed in the dental technology. We only use raw materials with the best quality from naturally occurring or synthetic gypsum from the food industry. SILADENT is leading in the analogue dental casting...

A two component (1:1) model material based on polyurethane with a low shrinkage for the production of demonstration and presentation models and for internal control models as well. • very low-viscous (thin flowing) • long working time • high precision and edge stability • easy to mill and grind • optionally dyeable in different colours Base former By means of the SILADENT base former, the model creation obtains a fast, economical and clean working basis. After 5 seconds only, the perfect base former is ready for each impression. The simple handling and the high economic efficiency (low...

Model system Profident 2010 This innovative, reliable model system ensures maximum precision and saves a great deal of time and material.There is no need to invest in additional, expensive equipment. The Profident 2010 can also be used for fabricating high-quality sectioned models quickly. After preparing the impression, the complete model including the base is fabricated in one step. The Profident 2010 has a preformed, dimensionally stable split cast. The components and pin base plates, which are supplied in two sizes, are reusable and cover all applications. Profident 2010 complete...

The European countries have approved set instructions for dental gypsum. Type 5 for super hard stone with high expansion are a new category. DIN EN ISO 6873, which is binding for all manufacturers, classies the products as follows: Typ 2 Plaster & Articulation plaster Typ 4 Super Hard Stone (up to 0,15 % expansion) Typ 5 Super Hart Stone (up to 0,30 % expansion) Following minimum requirements Standard for the different classes were stipu- consistency lated: in mm Minimum Min./Max. Max. hardening processing time hardening time expansion in % in minutes in minutes after 2 hours Min./Max....

Before mixing a new load of gypsum, check whether the mixing equipment is clean and dry. Remnants of old gypsum on mixing-spatulas, containers or stirrers will give rise to negative changes in the setting time and in the expansion of the new mixture. Ideally, gypsum should always be mixed in vacuum and in carefully weighed ratio of powder to water. Measuring by rule of thumb will naturally lead to considerable deviations in the technical data. The duration and intensity of stirring must be adapted to the manufacturer's specifications. The water must always be filled in first and the gypsum...

Casting Modelling time Mixing in a vacuum mixer generally has a positive eect on the gypsum. When mixing mechanically in a vacuum, you will need only half the time quoted for manual mixing, i.e. 60 seconds mixing by hand equals 30 seconds mixing by machine (280 rounds/min. with 5-6 bar). You should never add more gypsum powder to an excessively thin mix or more water to an excessively thick mix. You will only be interfering in the setting process and will damage the gypsum crystal structure. The finish mixture must be transfered immediately to the mould. Never mix more gypsum at the time...

There is no such thing as a universal gypsum that meets all requirements. The principal indications for the various dental gypsum are listed below. Of course, the use of these gypsum may overlap, depending on your experience in this field.

ARTICULATION PLASTER, TYPE 2 Dr. Balzer® Special plaster Natural material Articulation plaster Peppermint flavour A fast setting, high precision special plaster with peppermint smell, which is mainly used as a fast setting articulation plaster. Dr. Balzer is easy to handle, has a creamy consistency and guarantees an exact impression with a very low expansion. Recommendation: Articulation. Articulation plaster Natural material with lemon smell A special plaster for articulation works, characterised by slight expansion and excellent setting properties. For bite-interlocking, transfer sockets...

ARTICULATION PLASTER, TYPE 2 Articulation plaster Synthetic material A special plaster for articulation works, characterised by slight expansion and excellent setting properties. For bite-interlocking, transfer sockets and reaming techniques, pre-walls and reamed sockets; fixing of KFO sockets, registering bite. Recommendation: Articulation Mounting Stone Natural material Controlled plaster, very white, for precise impression and articulation work. Extremely low setting expansion and excellent positioning. Absolute precision is ensured for articulation casts. Its short setting time...

ARTICULATION PLASTER, TYPE 2 Spezial Natural material Produced of pure Alabaster of the Harz mountains, contains a quarter of hard stone. Moulds made with this alabaster plaster are volume constant and solid. Controlled expansion. Long setting time: 18 - 22 minutes. Recommendation: study models, fixing of situation casts. Dura semi-hard plaster Natural material Is used for laboratory work, when hard stone is too hard and the conventional plaster is too soft. Dura semi-hard plaster ist especially suitable for working on plastics. With this plaster best results can be achieved....