Medical Gas Systems Since 1950 Automatic Medical Gas Changeover Manifold Model MN The SILBERMANN Automatic changeover unit is designed for continuous supply of gas at the pressure of up to 8 bars. ■ The SILBERMANN Automatic changeover unit is designed for continuous supply of gas at a pressure of up to 8 bars (higher outlet pressure upon customer request). Applicable standards: ■ NFPA99, EN ISO 73961-1 & G0-1 requirements. ■ The panel includes a mechanism that switches the supply from the “in service” bank to a “reserve” supply bank, when the “in service” bank is empty. After rotating the lever and replacing the empty bank cylinders, the previous “in service” becomes the “reserve” bank for the next operation. ■ The panel is equipped with two manifold pressure regulators (in case of malfunction), mid range gauge, line pressure regulators w/bypass valves, all mounted on a white baked painted steel panel. ■ CE marked by the notified body TUV-SUD ■ safety value@6 bar supplied with the panel. The manufacturer reserves the right to make changes without not

Automatic Medical Manifold Model MN Technical Data ■ Panel material - steel. ■ Panel finish - baked on powder coated. ■ Piping System: All materials are oxygen compatible. ■ Changeover mechanism: pressure difference. ■ Output connections for local alarms: ■ Flow Capacity: Oxy/medical air (4 bar) - 90 m3/hr. ■ High pressure regulators inlet - G 3/4” Female nut. ■ Max inlet (cylinder) pressure 200 bar. ■ Standard oxy. Outlet pressure 4-5 bar. ■ Standard outlet pressure for Nitrogen is 8 bar. ■ Higher pressure available upon request. Catalogue Numbers Gas Type The manufacturer reserves the right...

Automatic Medical Manifold Model MN Dimensions Number of Cylinders* * Cylinders arn't included. Distributed By: SILBERMANN Technologies Ltd. Address: #5 Harakevet st. POB 4605, Petah-Tikva, 4900715, ISRAEL Tel: +972-3-9309186 | Fax: +972-3-9315721 E-Mail: [email protected], www.silbermnn.com Medical Gas Systems Since 1950