atSilbermann Medical Gas Systems Since 1950 Recessed (Wall) Service Outlet Quick-Connect DIN Type We design and manufacture our Terminal Units to last and to ensure a constant and reliable medical gas flow for the patient and the medical equipment. All outlets are 100 % tested for flow, leakage and are cleaned for oxygen services prior to shipping. Our outlets are designed by industrial designers to ensure an appealing and pleasant environment for the patient and the medical staff. ■ Accepts DIN 13260-2 gas specific adapters. ■ All outlets are 100% hydrostatic tested for leaks. The outlets are factory assebled, degreased and cleaned for medical gas service. ■ Indexed to eliminate interchangeability of gas services. ■ 360O swivel inlet pipe for ease of installation. ■ Double position allowing parking of male adapter in the outlet. ■ Low maintenance due to use of VITON seals in front assembly (latch valve). ■ Optional - Outlets for MRI use are available upon customer request. ■ Modular singles - designed to provide ganging of ■ Ce marked by the rough-in modules in the field to form multiples at notified body TUV-SUD any order with 120mm spacing. ■ The medical gas outlet shall be SILBERMANN DIN type manufactured according to ISO 9170-1 DIN 13260-2. ■ With the rough-in mounted, the outlet shall be depth adjustable to compensate for various wall thicknesses. ■ The outlet shall be gas specific by indexing each front service panel to a gas specific pin indexed rough-in module. ■ The outlet of positive and negative pressure shall consist of a primary and secondary check valves to allow testing and on-line maintenance. ■ Outlet shall be manufactured with 175 mm long, type K, 12.7 mm (1/2”) OD copper pipe. Rough-in pipe shall be silver brazed to the outlet body. ■ The quick connect outlet shall comply with ISO 9170-1 standard type and accept only corresponding DIN 13260-2 Gas Specific Adapter. ■ Pressure drop of less than 20 Kpa through the outlet at 120 LPM and 350 Kpa (3.5 Bar) inlet pressure. ■ When fully open, the outlet allows a flow of up to 600LPM and pressure of 400 KPa (4 Bars). The manufacturer reserves the right to make changes without notification ww

Medical Gas Pipeline Dimensions [mm] Catalogue Numbers Medical Gas Systems Since 1950 Address: #5 Harakevet st. POB 4605, Petah-Tikva, 4900715, ISRAEL Tel: +972-3-9309186 | Fax: +972-3-9315721 E-Mail: [email protected], www.silbermnn.com