HSilbermann Medical Gas Systems Since 1950 Recessed (Wall) Service Outlet DISS Type We design and manufacture our Terminal Units to last and to ensure a constant and reliable medical gas flow for the patient and the medical equipment. All outlets are 100 % tested for flow, leakage and are cleaned for oxygen services prior to shipping. ■ Accepts DISS gas specific adapters. ■ All outlets are 100% hydrostatic tested for leaks. The outlets are factory assembled, degreased and cleaned for medical gas service. ■ Indexed to eliminate interchangeability of gas services. ■ 360° swivel inlet pipe for ease of installation. ■ Safe plug-in & release allowing parking of male adapter on the outlet thread without pressure applied. ■ Low maintenance due to use of VITON seals in front assembly (latch valve). ■ Modular singles - designed to provide ganging of rough-in modules in the field to form multiples at any order with 120mm spacing. The manufacturer reserves the right to make changes without notification

Medical Gas Pipeline Specification ■ The medical gas outlet shall be SILBERMANN DISS type manufactured according to NFPA99. ■ The outlet shall be gas specific by DISS system. ■ The outlet of positive and negative pressure shall consist of a primary and secondary check valves to allow testing and on-line maintenance. ■ Outlet shall be manufactured with 175 mm long, type K, 12.7 mm (1/2”) OD copper pipe. Rough-in pipe shall be silver brazed to the outlet body. ■ With the rough-in mounted, the outlet shall be depth adjustable to compensate for various wall thicknesses. ■ The quick connect outlet...