A Major Improvement in Sample Protection What is the most common way of keeping samples and reagents cold on a laboratory counter prior to analysis or during transport? Ice! It is inexpensive, easy to obtain and easily discarded. However, ice cooling has its inconveniences; Tubes placed anywhere in the ice will change positions as the ice melts and become wet (or submerged instead of wet) . The melting process will also prevent consistent sample temperature and will require constant vigilance to ensure the samples won't sink or float in the ice water which might be dirty and contaminated. Inconvenients...

ChillBlock™ thermo-conductive metal alloy tube racks eliminate inconsistencies which occur due to inserting tubes directly into ice, dry ice, alcohol baths, water baths and other common laboratory temperature sources. Place the ChillBlock™ tube rack directly onto a temperature source and it will rapidly adapt to that temperature from -150°C to >+100°C. ChillBlock™ tube racks ensure +/- 0.1°C temperature uniformity of all tubes when cooling, freezing or heating. ChillBlock™ tube racks are available in a variety of sizes for tubes such as microcentrifuge tubes, cryogenic vials, PCR tubes, SBS-compliant...

Microcentrifuge Tube Rack S700-8 ChillBlock™ Microcentrifuge Tube Racks are available in five models with 6 to 96 wells. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. These racks will hold 1.5 ml and 2.0 ml snap cap Microcentrifuge tubes. They will also accommodate the popular 0.5 ml to 2.0 ml screw cap Microcentrifuge tubes such as the Simport® Micrewtube® Series. These wells have a vertical wall in order to accomodate all types of Microcentrifuge tubes up to 2 ml. This group of racks will also accommodate the popular 0.5 ml to 2.0 ml screw...

TM Thofiie Tit MCcs^centuta^e Tide 'Rack S700-16 and S700-18 ChillBlock™ Profile Fit Microcentrifuge Tube Racks are available with either 15 & 30 wells holding 1.5 ml snap cap Microcentrifuge tubes. S700-14 is a 30-well rack and will hold 0.5 ml tubes. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. Each cavity will ensure a more efficient thermal exchange since it is in direct contact with the entire tube wall. Cat. No Wells Dimensions (L x W x H) Qty/Cs In your ™racks, have you ever considered using Simport® Microcentrifuge tubes? Cliklok™...

15 ml and 50 ml Centrifuge Tube Racks The ChillBlock™ 15 ml and 50 ml Centrifuge Tube Racks are available in two configurations, one of 9 wells for 15 ml centrifuge tubes and one of 4 wells for 50 ml centrifuge tubes. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. S700-40 Alphanumeric identification of wells facilitating tube location racks, have you ever considered using Simport® Centrifuge tubes? Suitable for general centrifugation, urinalysis procedures and serum separation. These conical bottom tubes are chemically clean and metal free, ready...

ClyogeniC VCa£ Tube Rocks ChillBlock™ Cryogenic Vial Racks are specially designed for Cryogenic vials and are available in four models with 15 to 45 wells. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. These racks will hold 1.0 ml to 2.0 ml inner and outer threaded Cryogenic vials. They will also accommodate the Simport® similar sample tubes (T500 and T501 Series). Rack S700-60 has a universal locking base, allowing most cryogenic vials to lock in place and facilitate screw cap removal using only one hand. In your ™racks, have you ever considered...

Selection Chart Item No. Well Shape Well Diameter Well Depth Column Spacing 500 µl Conical Microcentrifuge Tubes 1.5 ml Conical Microcentrifuge Tubes 1.5 ml Conical Microcentrifuge Tubes For full details, consult our website and catalog or contact one of Customer Service Representatives at 450 464-1723.

Selection Chart Item No. Well Shape Well Diameter Well Depth Cryogenic Vials Cryogenic Vials Cryogenic Vials Column Spacing Cryogenic Vials ChillBlock Tube Racks ChillBlock Tube Racks For full details, consult our website and catalog or contact one of Customer Service Representatives at 450 464-1723.

Open your Windows. We are Just Next Door!

A Major Improvement in Sample Protection What is the most common way of keeping samples and reagents cold on a laboratory counter prior to analysis or during transport? Ice! It is inexpensive, easy to obtain and easily discarded. However, ice cooling has its inconveniences; Tubes placed anywhere in the ice will change positions as the ice melts and become wet (or submerged instead of wet) . The melting process will also prevent consistent sample temperature and will require constant vigilance to ensure the samples won't sink or float in the ice water which might be dirty and contaminated. Inconvenients...

® 2588 Bernard-Pilon Beloeil, Qc J3G 4S5 Canada Phone: (450) 464-1723 Fax: (450) 464-3394 Email: [email protected] Website: www.simport.com