Culture Tubes T400 Collection
1 / 12Pages

Canadian and Family Owned Since 19

T400-3AAM 12 X 75 mm polypropylene amber tube Disposable Culture Tubes NON STERILE Made of either polystyrene or polypropylene -Ideal for use in bacteriology, RIA, coagulation and other routine laboratory procedures. Simport® uses no mold release agents that could cause errors and interferences in RIA tests. Precision molding with virgin thermoplastics ensures that our tubes are uniform in size and shape as well as being chemically clean and ready to use. The polypropylene tubes are translucent and will withstand over 3000g during centrifugation. They will also accept most common acids,...

T401 Caps and Stoppers Made of polyethylene The plug type push-in caps will fit in tubes with outside diameter of 12mm. T401 -10N to T 401-10Y caps are specifically designed for urine tubes T408 on page 6. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological procedures; and the fully sealed position where the cap is pushed tight to seal the tube for anaerobic use or for storage, transfer and centrifuge applications. Not autoclavable. Available for 12mm and 17mm tubes. Color Qty/Bag Qty/Cs Natural 1000 4000 For...

Color Qty/Pk T403FitsAll™ Universal Caps Made of polyethylene Designed for easy-on, easy-off use. Cap removal is simple and quick. FitsAll™ closure is ideal for recapping most 12 mm and 16 mm O.D. evacuated glass blood collection tubes. Flexible FitsAll™ closures protect from aerosols of highly infectious microorganisms. They guard samples against cross-contamination and laboratory work areas against infection and spillage. Precision molded from low-density polyethylene, FitsAll™ fits firmly on the tube. FitsAll™ caps are very sturdy under most rigorous procedures, including centrifugation....

Made of thermoplastic elastomer These disposable closures produce a firm, leak-resistant seal for glass and plastic tubes. They will protect samples from evaporation and contamination. They can be easily applied and removed with one hand. They can be punctured to allow through-cap sampling via closed-tube instrumentation systems. Will not interfere with most common chemistry, coagulation, and drug monitoring methodologies. They can be stored in the refrigerator, in the freezer or at room temperature. They even withstand agitation in a test tube Vortex mixer. Two sizes, 13 and 16 mm fit a...

Culture Tubes 13 x 100mm Screw Cap Tube made of polystyrene / Cap made of polyethylene These 8 ml screw cap tubes are available either sterile or non sterile. A special tamper evident cap is offered for applications needing the utmost security where sample integrity is of high importance. Tubes are made of optically clear polystyrene and can be centrifuged up to 3000 x g. These are not treated for cell culture. The sterile ones are sterilized by gamma radiation and are non pyrogenic. Tamper Evident Qty/Bag Qty/Cs For color coding purposes, use a Capinsert™ on top of the closure. Ten...

Cultubes™ Sterile Culture Tubes Made of polystyrene or polypropylene These disposable sterile tubes can be used for most routine laboratory procedures. They are biologically inert and exempt from mold release agents. Precision molding with virgin thermoplastics ensures that our tubes will be uniform in size and shape. High resistance to breakage reduces danger in handling infectious or other potentially harmful cultures. Tamperproof tear off seal ensures sterile product integrity. Bag can be resealed as often as needed. Transparent polystyrene tubes will withstand moderate centrifugation...

Color Qty/Cs orange. pink and yellow orange, pink and yellow Qty/Cs Made of polypropylene On one side, the Unirack™ can hold it can hold up to 80 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml as well as 1 to 5 ml cryogenic vials. Flip the UniRack™ over and you can store up to 60 PCR or microcentrifuge tubes from 0.2 to 0.5 ml. Units can be firmly anchored laterally to one another, thanks to special anchor pins supplied with each rack. This innovative concept will allow...

Made of acetal A newly designed tube support that can be used all around the lab. The MultiRackTM is available in three models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available today, it offers all the advantages required by the modern laboratory. Made of highly resistant acetal, it will not shatter or stain in contact with most laboratory chemicals. No coating to worry about, which can chip, peel or rust in a water bath. The MultiRackTM is compact, lightweight and stackable in order...

Capinsert, DrainRack, FistAll, Multi Rack, Pierce-It, UniRack, UniRack Jr, SeruRack and Vacucap are trademarks of Simport® Scientific. Simpat I Scientific 2588 Bernard-Pilon Beloeil, Qc J3G 4S5 Canada Phone: (450) 464-1723 Fax: (450) 464-3394 Email: info@simport.com Website: www.simport.com