PCR® Collection
1 / 16Pages

A Family O \pany Since 1975 The assurance of highly accurate and contaminant-free procedures

The assurance of highly accurate and contaminant-free procedures Driven by innovation, research and product development, Simport is a world leading laboratory products design and manufacturing company. Since 1975, Simport has developed, manufactured and marketed a broad range of innovative disposables to improve research techniques and methods. Our products are distributed worldwide through reputable laboratory and medical products distributors. Some of our superior quality products are also distributed under private label by some of the world’s leading laboratory products manufacturers and...

Designed for oil-free operation, these tubes are made of transparent superior quality grade polypropylene for better viewing of the contents. Their ultrathin wall design will ensure rapid thermal transfer and a significant reduction in cycle and PCR reaction time. Attached hinged caps are either dome or flat-topped and can be used with heated lids used by thermal cycler manufacturers. They provide positive sealing during thermal cycling and will prevent evaporation while being easily opened and closed with one hand. The cap has an integral shield preventing contamination with surface of...

T325-12 AMPLITUBE™ PCR REACTION TUBES (without cap) Made of polypropylene This thin wall 0.2 ml tube is very useful when processing smaller volumes. It offers optimum contact with thermal cycler blocks. The ultrathin wall will ensure rapid thermal transfer and a significant reduction in cycle and PCR reaction time. Specially designed with a highly polished surface and a round bottom for maximum sample recovery. Sealing can be achieved by using either T321-1 or T321-2 Series Cap Strips. Choice of colorless and four non-cytotoxic and non-metallic colors. Packed in tamperproof resealable bags....

All products on this page are certified RNase, DNase and Pyrogen safe. Pierceable flat cap Domed cap also provides a snap shut positive seal Simport Reaction Strips include 8 or 12 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for _ more uniform and efficient temperature transfer, therefore reducing PCR reaction time in most 96-well “V” 2 bottomed thermal cyclers such as MJ Research, Perkin Elmer, Hybaid and others. They are more easily handled than single tubes. They will precisely fit standard well spacing and can also 3 Can be cut and used as individual tubes be used with 8-...

These PCR Reaction Strips can be cut to any length. T320-2 & -3 AMPLITUBE™ PCR REACTION STRIPS This PCR reaction strip is available with either flat (needle pierceable) or dome-topped individually attached hinged caps. Made of polypropylene This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer. This PCR reaction strip is available with either flat (needle pierceable) or dome-topped...

T323 AMPLATE™ THIN WALL PCR PLATES Made of polypropylene These 96-well PCR plates are thin-walled and designed for rapid thermal transfer. Each well has a capacity of 0.2 ml. They are precision-molded to ensure weM-to-weM and plate-to-plate uniformity. The insides of the tubes are smooth and have an inert surface on which enzymes and nucleic acids do not bind. The plates will accommodate differences in expansion coefficients between the metal thermal cycler block and polypropylene tubes. For more convenience, pre-cut plates are also available in the following formats: 48 tubes (6 x 8) and...

• Alphanumeric grid for better identification • Flat surface for better sealing • Small volume reducing dead space between sample and cover CAN BE USED WITH ALL LEADING THERMAL CYCLERS Color Natural Blue Green Pink Yellow •Minimum quantity applicable. Please contact one of our customer service agents for further details. T323-96LP low profile AMPLATE™ 96 THIN WALL PCR PLATES Made of polypropylene These low profile 96-well PCR plates are similar to the regular Simport AMPLATE™ Series detailed on the previous page. However, each of the 96 tubes has a smaller volume (only 100 gl) and thereby...

AMPLATE™ RAISED RIM THIN WALL PCR PLATES Plates on this page are certified RNase, DNase, Pyrogen and DNA-free Color Natural Blue Green Pink Yellow Amplate™ Raised Rim thin wall PCR plates are the latest addition to the wide range of Simport PCR products. Offering just the right rigidity for automation, these four 96-well plates, made in a standard 8 x 12 configuration, are perfectly suited for high performance thermal cycling. Each well makes intimate contact with the heating block while quick and consistent heat transfer is ensured by a uniform wall thickness. Using a special...

T323-384SK AMPLATE™ 384 THIN WALL PCR PLATES Made of polypropylene This plate has been developed for high volume laboratory work. It is precision-molded to ensure well-to-well and plate-to-plate uniformity. T h e d e s i g n o f t h e A M P L AT E ™ 3 8 4 i s s u c h t h a t e a c h w e l l h a v i n g a 40 µl capacity can be used with reaction volumes from 2 to 30 µl. All wells on the plate are thin-walled to make sure that an efficient and fast heat transfer is occurring. Although it has 384 wells, it can be filled using automated fluid handling systems or standard multichannel pipettors....

T324-96SK OPAQUE SKIRTED AMPLATE™ THIN WALL PCR PLATES Made of polypropylene T h e s e o p a q u e 9 6 - w e l l P C R p l a t e s a r e f o r chemiluminescent and fluorescent procedures. Each well has a capacity of 100 µl. Thin-walled and designed for rapid thermal transfer. They are precision-molded to ensure well-to-well and plate-to-plate uniformity. All sealing methods can be used for oil-free operation: domed and flat cap strips (T321 Series), SecureSeal TM Thermal and foil (T329 Series), and Amplate™ Mat (T329-10). Suitable to be used with all 96-well shaped cyclers such as Ericomp...