Lab Ultrasonic processor for pipe
8Pages

{{requestButtons}}

Catalog excerpts

Lab Ultrasonic processor for pipe - 1

Lab Ultrasonic processor for pipe High volume treatment

Open the catalog to page 1
Lab Ultrasonic processor for pipe - 2

Lab Ultrasonic processor for pipe 20/07/2015 ■SinapTec ULTRASONIC TECHNOLOGY * --- I Specifications of the Lab750 Ultrasonic for pipe I.1 Equipment • Ultrasonic generator from the NexTgen range delivering up to 750Wrms in a continuous way • Lab tube Processor including the 22kHz transducer, • LabTablet interface for easy setting, • Temperature control device with temperature sensor included to the ultrasonic generator to allow temperature monitoring, • Control and monitoring software for the NexTgen generator, • Technical documentation. I.2 The NexTgen ultrasonic power generator We...

Open the catalog to page 2
Lab Ultrasonic processor for pipe - 3

Lab Ultrasonic processor for pipe 20/07/2015 The parameters of the generators from the NexTgen range can be defined by a LabTablet or by computer thanks to an Ethernet connection and a control software enabling the power tuning. This elementary setting software is called "Start" and is supplied with the generator. A general and technical documentation is added to the offer and describes the generator and its software features. Basic    features: A single control mode : auto-tuned frequency mode, On/Off by with pushbutton/footswitch, The power setting can be done by computer and thanks to...

Open the catalog to page 3
Lab Ultrasonic processor for pipe - 4

Lab Ultrasonic processor for pipe 20/07/2015 • The equipment consist of a tube with radial external transducer fixed around the tube. The main advantage of this configuration to promote radial propagation with a high level of energy along the axis of the tube. There is no probe inside and the cavitation erosion is less important regarding the high power of the system. The Tube processor sonicate in batch condition with volume arrangement from 0.5 liter with a thick tap at the bottom up to 0.8 liter. In these configurations the power/liter is able to increase to 800W/l. Tube Processor Power...

Open the catalog to page 4
Lab Ultrasonic processor for pipe - 5

Lab Ultrasonic processor for pipe 20/07/2015 Min liquid level (0,6 liter) Radial ultrasonic power Batch normal condition (0,6l volume) Min liquid level (0,5 liter) with a thick tap Radial ultrasonic power Figure 5: Batch Thick tape condition 0,5l volume In batch condition, the temperature increase is fast, and to avoid any problem, the temperature is managed with the generator with a stop condition. It is very easy to adapt this equipment for continuous processing by removing the two taps and connect the equipment in a loop. The scale up consist to provide an industrial tube with a 4 to 8...

Open the catalog to page 5
Lab Ultrasonic processor for pipe - 6

Lab Ultrasonic processor for pipe 20/07/2015 The control and data acquisition software (optional):  The software allows you to centralize all exchanges between the NexTgen generator and the PC control. It controls the start / stop system. It allows you to configure the following settings: o Frequency o Amplitude / Power o Time o Cycle It allows the following things: o The real-time measurement of the power cycle, o The graph visualization, o Data export to Excel o Various features analysis  Temperature control device : The operation of the temperature control device is performed by the...

Open the catalog to page 6
Lab Ultrasonic processor for pipe - 7

Lab Ultrasonic processor for pipe 20/07/2015

Open the catalog to page 7
Lab Ultrasonic processor for pipe - 8

e-mail : sinaptec@sinaptec-ultrasonic.com

Open the catalog to page 8

All Sinaptec catalogs and technical brochures