Lab Ultrasonic for Radial Probe High volume treatment

Lab Ultrasonic for Radial Probe 27/07/2015 ■SinapTec ULTRASONIC TECHNOLOGY * --- I.1 Equipment • Ultrasonic generator from the NexTgen range delivering up tp 750Wrms in a continuous way, • 20kHz ultrasonic radial probe including the 20kHz transducer, • LabTablet interface for easy setting, • Control and monitoring software for the NexTgen generator, • Optionally temperature control device composed of a temperature sensor and an acquisition unit connected to the ultrasonic generator to allow temperature monitoring • Technical documentation. I.2 The NexTgen ultrasonic power generator We therefore...

Lab Ultrasonic for Radial Probe 27/07/2015 ■SinapTec ULTRASONIC TECHNOLOGY * --- The parameters of the generators from the NexTgen range can be defined by a LabTablet or by computer thanks to an Ethernet connection and a control software enabling the power tuning. This elementary setting software is called "Start" and is supplied with the generator. A general and technical documentation is added to the offer and describes the generator and its software features. Basic features: • A single control mode : auto-tuned frequency mode, • On/Off by dry contact, • A default feedback by dry contact •...

Lab Ultrasonic for Radial Probe 27/07/2015 ■SinapTec ULTRASONIC TECHNOLOGY * --- • The probe deliver the ultrasound on all the length of the probe. The design increases the radial power emission and we can consider that 80% is delivered radially and 20% at the bottom of the probe. The probes are ideally efficient if inserted in a tube. The diameter of the tube gives the ultrasonic intensity. The following table calculate the power by liter versus diameter of the tube. Radial Probe tube probe Sonicated Power diameter immersion volume The proposed volume above is calculated to...

Lab Ultrasonic for Radial Probe 27/07/2015 ■SinapTec ULTRASONIC TECHNOLOGY * -- The probe is adapted in batch or continuous flow working conditions. It is important to cool the transducer in case of long duration process. I.4 The control and data acquisition software (optional): • The "Advanced" PC software The software allows you to centralize all exchanges between the NexTgen generator and the PC control. It controls the start / stop system. It allows you to configure the following settings: o Frequency o Amplitude / Power o Time o Cycle It allows the following things: o The real-time measurement...

e-mail : [email protected]