AUTOCLAVE How It Works Only a solidly and sturdily designed chamber and lid can keep the high pressure safely. When the temperature goes up and the chamber limits its space, only the pressure will go stronger. This process makes higher than 110 ℃ of steam in the chamber. The Purpose of Use Not all living organisms badly suffer from 110 ℃ of heat. Some living organisms are able to resist heat due to their structural protein walls. However, any micro-organism cannot survive from over 121 ℃ of steam. Therefore, the design purpose of Autoclave is to ensure a sterile environment in each field of life and science. The Field of Use Bio and life science laboratory, medical institution, food production industry, veterinary indust

Autoclave (Medium & Large) SJ–ML series is suitable for a large volume of sterilization. 5 sterilizing cycles, 2 performance tests, and the user mode are provided to meet the different needs of sterilization. The Double jacket structure is applied for safe and efficient operation. Smart Control System Fully Automatic Process Vaccum System 12 self-diagnosis warning codes, LED and LCD indicators Water Supply > Pre-Vacuum > Heating > Sterilization > Steam Vent > Vacuum Dry > Complete The enhanced sterilization and drying performance by water pump and water ejector Safety Device 1. Over Temp. Prevention...

SJ-ML series For product improvement, the specifications below are subject to change without prior notice, and please contact us for specification consultation. Spec / Model Overall Size (WxHxL)mm Size (ØxL)mm Type Chamber Material Capacity Vacuum / Gravity Temp. Range Sterilization Steam Generator Control System Water Source Vacuum System Water Pump / Water Ejector Power Source Size (WxHxL)mm Tray Material Drain Pipe Weight Safety Device Over Temp. Protection / Over Pressure Protection / Circuit Breaker / Safety Valve / Self Diagnostic System