AUTOCLAVE How It Works Only a solidly and sturdily designed chamber and lid can keep the high pressure safely. When the temperature goes up and the chamber limits its space, only the pressure will go stronger. This process makes higher than 110 ℃ of steam in the chamber. The Purpose of Use Not all living organisms badly suffer from 110 ℃ of heat. Some living organisms are able to resist heat due to their structural protein walls. However, any micro-organism cannot survive from over 121 ℃ of steam. Therefore, the design purpose of Autoclave is to ensure a sterile environment in each field of life and science. The Field of Use Bio and life science laboratory, medical institution, food production industry, veterinary indust

In laboratories and medical fields, many items require the proper sterilization in between each usage SJ-TB series is designed for easy and clean maintenance in a very delicate and careful environment. Fully Automatic Process Water Supply > Pre-Vacuum > Heating > Sterilization > Steam Vent > Vacuum Dry > Complete Non-heater chamber brings a wider space for the sterilization object load Sanitary Management Water Management : Separated reservoir and retriever tanks Chamber Managemet : Non-possibility of heater-caused contamination Safety Device 1. Door Lock Sensor 2. Over-temp Prevention 3. Pressure...

SJ-TB series For product improvement, the specifications below are subject to change without prior notice, and please contact us for specification consultation. Spec / Model Overall Size (WxHxD)mm Chamber Size (ØxD)mm Sterilization Electronic Power Power Consumption Noise Level Door Lock Check / Over Temp. Protection / Over Pressure Protection / Chamber Pressure Auto Sensing / Door Interlock / Circuit Breaker (Bimetal) / Water Level Sensor / etc. Safety Device Accessories Power Cord Water Reservoir Tank and Hose Water Retrieve Tank and Hose