Catalog excerpts
5085 Corporate Exchange Blvd. S.E. Grand Rapids, MI 49512 • 616.656.2900 INTRODUCTION SKYTRON Clean Up Stations are used for the pre-cleaning, inspection and sorting during the decontamination process of surgical instruments. SS2712 - DUAL SINK SS2713 - TRIPLE SINK STANDARD ACCESSORIES Each SKYTRON Clean Up Station shall include: • Crumb cup strainers and tail pieces for each bay to connect to the facility drain. • Hot and cold water fixture that mounts to the backsplash, one for double sink, two for triple sink. TECHNICAL DATA SKYTRON Clean Up Stations are available in two models, a two bay sink and a triple bay sink. SKYTRON Clean Up Stations have sound deadening material added to the underside of the countertop, sink bottom and backs. Sink basins are 18” x 24” x 12”D (457 x 610 x 304mm), backsplash is 8” high with 45° edge. To each side of the basins there are pitched drain board to alleviate the pooling of water as well as a rolled edge on the sides and front to retain any water within the clean up station perimeter. • Pure water fixture for connection of mineral free water or similar that mounts to the backsplash, one provided per Clean Up Station. • Wall mounting brackets that attach to backsplash and wall for ease of installation. • Leveling feet to provide adjustment up to 1½” (38mm). ARCHITECTURAL SPECIFICATION Material: Type 304 Stainless Steel, 16 gauge Welds: HeliArc welded and polished Hardware: Water Fixtures by WaterSaver Undercoating: Applied to all unexposed areas, reduces noise and condensation build up Finish: #4 satin finish TEC-F-0025 REV1 09/25/2012
Open the catalog to page 1CLEAN UP STATION 2 SINK S/S SINKTOP & BACKSPLASH P.W., HOLE DRILL IN FIELD 8" [203mm] FINISHED FACE & SIDES OF BOWLS S/S TUBULAR LEGS (4 req'd) TOTAL FOOT ADJUSTMENT IS 1-1/2" (38mm). DEADEN BACKS & BOTTOMS CLEAN UP STATION 3 SINK S/S SINKTOP & BACKSPLASH 8" [203mm] 8" [203mm] FINISHED FACE & SIDES OF BOWLS 36" [914mm] DEADEN BACKS & BOTTOMS 45° SLOPED SPLASH P.W., HOLE DRILL IN FIELD S/S TUBULAR LEGS (4 req'd) TOTAL FOOT ADJUSTMENT IS 1-1/2" (38mm).
Open the catalog to page 2All Skytron catalogs and technical brochures
-
LUCINA 4
4 Pages
-
AURORA FOUR
8 Pages
-
Lumos
4 Pages
-
1602 Essentia
8 Pages
-
GS70 Salus
8 Pages
-
Skytron Table Accessory Guide
40 Pages
-
Skytron TR-7 Series
2 Pages
-
SPECTRA AUT1
2 Pages
-
STELLAR XL
4 Pages
-
PROCESS SOLUTIONS - IRIS
4 Pages
-
SS2712E/SS2713E
2 Pages
-
ERGOSTAT® PREP & PACK TABLES
4 Pages
-
I-SERIES WASHER-DISINFECTORS
4 Pages
-
integrity
6 Pages
-
ERGON 3 BOOMS
12 Pages