*mymedicalexpo

Catalogs
SLEE medical GmbH
MPSPII Modular paraffin embedding center

MPSPII Modular paraffin embedding center

Product catalog summary

Product Overview: The MPS P II is a modular paraffin embedding center consisting of three main modules: the dispensing element (MPS P), a pre-warming module (MPS W), and a cooling plate (MPS C or MPS CX). It is designed for use in laboratories for embedding tissue samples in paraffin.

Specifications:

MPS P (Dispensing Module): Operates at 115 V or 230 V with a power consumption of 400 VA. It features a paraffin tank with a 5.5-liter capacity, LED lighting, and a work area temperature range of 30 - 80 °C. The module dimensions are 450 x 570 x 295 mm, and it weighs 23 kg.

MPS W (Pre-warming Module): Also operates at 115 V or 230 V with a power consumption of 320 VA. It includes a cassette bath and storage for approximately 150 cassettes and 500 molds, with a work area temperature range of 30 - 80 °C. The dimensions are 300 x 570 x 295 mm, and it weighs 13 kg.

MPS C (Cooling Module): Operates at 115 V or 230 V with a power consumption of 150 VA. It features a cooling gas R 134 a and a temperature range down to -15 °C. The work area is made of anodized aluminum, measuring 270 x 370 mm, and can hold 80 cassettes. The dimensions are 400 x 570 x 295 mm, and it weighs 24 kg.

MPS CX (Advanced Cooling Module): Similar to MPS C but with a higher power consumption of 250 VA and a programmable cooling plate temperature range from -5 to -15 °C. It can hold 120 cassettes and 375 molds. The dimensions are 600 x 570 x 295 mm, and it weighs 30 kg.

Installation Requirements: All modules require installation at altitudes below 2,000 meters and a minimum distance of 15 cm from walls.

Standard Components: The system includes a foot switch for the paraffin dispenser, an adjustable magnifier, a paraffin collection tray, forceps holder, forceps, a cleaning spatula, base molds, a mains cable, and a manual.

Compliance: All modules comply with IEC 1010 and EN 61010 standards, ensuring safety and reliability in laboratory environments.

Contact Information: For further inquiries, contact SLEE medical GmbH at Am Neuberg 14, 55268 Nieder-Olm, Germany, or via phone at +49 (0) 6136 76997-0 or email at [email protected].

Catalog excerpts

MPSPII Modular paraffin embedding center-1

Product specification M PS P I I ∙ M o dul ar paraf fi n embe dding ce nte r Item No.: 10185000 230 V, 50/60 Hz Item No.: 10187000 115 V, 60 Hz Th e fl ex i b l e 3 - m o d u l e sys te m c o n s i s t s o f a dis pens ing elem ent MPS P, a pre-warm ing m odule M PS W an d a c o o l i ng p l a te M P S C o r M PS CX. Specifications MPS P Nominal power: Nominal frequence: Overvoltage protection category Operating temperature range Operating humidity Storage temperature range Storage humidity

Open the catalog to page 1

MPSPII Modular paraffin embedding center-2

Specifications MPS P Paraffin tank Cool spot Forceps holder Work area Installation requirements Specifications MPS W Nominal power: Nominal frequence: Overvoltage protection category Operating temperature range Operating humidity Storage temperature range Storage humidity Cassette bath, storage for moulds approx. 150 cassettes, approx. 500 moulds, 30 - 80 °C Installation requirements

Open the catalog to page 2

MPSPII Modular paraffin embedding center-3

Specifications MPS C Nominal power: Nominal frequence: Overvoltage protection category: Operating temperature range Operating humidity Storage temperature range Storage humidity Temperature range Work area anodized aluminum 270 x 370 mm 80 cassettes Installation requirements

Open the catalog to page 3

MPSPII Modular paraffin embedding center-4

Specifications MPS CX Nominal power: Nominal frequence: Overvoltage protection category: Operating temperature range Operating humidity Storage temperature range Storage humidity Temperatur Kühlplatte Work area Installation requirements

Open the catalog to page 4

MPSPII Modular paraffin embedding center-5

Standard components Dispensing module MPS P Pre-warming module MPS W Cooling module MPS C for 120 cassettes Foot switch for paraffin dispenser Magnifier, adjustable Paraffin collection tray Forceps holder Forceps (1 x blunt, 1 x pointed) Cleaning spatula, black Base molds 7 x 7 x 7 mm (stainless steel, 12 pcs.) Base molds 24 x 24 x 7 mm (stainless steel, 12 pcs.) Mains cable Manual Comments / additional information: In case of further questions, please feel free to contact us at every time. SLEE medical GmbH • Am Neuberg 14 55268 Nieder-Olm • Germany www.slee.de T: +49 (0) 6136 76997-0 M: [email protected]...

Open the catalog to page 5

All SLEE medical GmbH catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list