STERN PODIA D Please note that the images present in this catalogue are for illustration and promotional purposes only. Actual product and design may slightly vary due to product enhancement, different device screen settings, the lighting in the installation location, slight differences in product finishes over time and other factors. SMD Stern Podia will not accept responsibility for any color or design differences that are not factory faults.

Steel chassis with highly resistant covers of ABS+PMMA, mounted on steel base with 4 rotary castors. Fasteners in high strength stainless steel. 2 big lateral drawers on the left side + chest of drawers (configuration of your choice) DENEB is always in ambidextrous configuration Worktop in Corian BTS with raised edge Double articulated and compensated arm on three joint. Instrument holder comprising instruments, functions and controls of electric, pneumatic and hydraulic circuits. Pressurized container of spray water. Air filter with automatic drain of condensation. Movable and ambidextrous Touch...

Swiss and Italian electronic boards OPERATING UNITS: Class IIa Medical Device Internal Transformer device certified as medical Reducers to adjust both air and spray flow-rate ABS-PMMA casings Structure made of steel treated against oxidation Chip Blower: air flux via direct pressure of the pedal lever (on SL / AS pedals) Wheels to guarantee easy movements 3

The pedal is NOT included in the price of the unit The pedal is NOT included in the price of the unit Possibility to choose between: Possibility to choose between: Deneb: just a few movements to change from left-handed to righthanded users and vice versa The pedal is included in the price of the unit ON/OFF Pedal ON/OFF Pedal The pedal is included in the price of the unit A Quasar: ON/OFF Pedal Please note that an air compressor is necessary for the functioning of the SMD operating units but not included in the price, since it can be easily found in any market

ON/OFF Pedal Activation of the instruments at the pre-set speed SL and AS MULTIFUNCIONAL PEDALS allow to progressively work until the pre-set maximum speed SL multifunctional pedal Progressive increase of the speed of u 1 both Micromotor and Turbine Vertical shifting on "A" lever when dynamic instruments are not active: activation of dynamic instruments chip-blower function. spray activation both in continuous and sequential way

SMD ADDITIONAL SECURITY SYSTEMS: ■ Hydro Stop: air flux automatically activated any time the micromotor stops working to avoid cross contaminations ■ Impossibility to work with spray and suction at the same time ■ Impossibility to work if compressor is not connected to the unit ■ Impossibility to work if the bottle containing water is not pressurized ■ Activation of only one instrument at a time

Intermittent or continuous Spray function  Available in SMD operating unit only ROTATION DIRECTION PUSH-BUTTONS OPTICAL FIBRES SWITCH ON/OFF PUSH-BUTTONS Worktop in Corian BTS Possibility to choose drawers configuration

WITHOUT HANDLES WHITE HANDLES COLORED HANDLES Drawers mounted on "push" slides that allow the opening of the drawer with a slight pressure on the front panel. Drawers mounted on soft closing slides and equipped with a newly designed aluminum handle painted in white. Drawers mounted on soft closing slides and equipped with a new design aluminum handle painted in a color of your choice from Stern Podia selection.

“Straight” 3-way syringe with air, water, and spray Integrated suction duct with stop device for spring tension arm and coaxial nozzle to be applied to the micro motor. Suction effect prolonged and timer-controlled. - indicated to work with dry or mixed technique, suitable for all micromotors in the Price List

ASPI-COMP Suction motor The suction motor is housed in a proper sound-proof steel cabinet, with silencer, switch and protection fuses. Suction filter included Sucked air: 60 m3/h. ASPI-COMP Suction motor with suction arm ¥ PODIA H ASPI-COMP integrated in the operating unit (not available for Quasar and Exagono models) Operating units and group accessories 15

Genesis 24 air compressor Oil-less 2-cylinders motor with soundproofing case membrane dryer, aircondensation filter 0,01micron - Power 1,1KW - Air delivery 120 l/min - Tank 24 liter - Noise 50 dB(A) - Dimensions 530x500x800 - Weight 67 Kg Post for operating lights Available in three different heights: - 530 mm - 340 mm - 220 mm SUNLED led lamp 7 led x 3 Watts (used 70%) Color temperature 6.300° K Power supply 24 Volts 15 watts total Double articulated and compensated arm Operating units and group accessories 16

Additional chest of drawer Tray for instrument holder Operating units and group accessories 17

Operating units and group accessories 18