DYONICS™ POWER Powered Instruments • ordless and corded options C • ide variety of blades and W accessor

Power Instruments DYONICS™ POWER Instrumentation Battery Operated Power Equipment Battery Operated Power Equipment Reference # 450 Drill, with battery, 1/4" Jacobs Chuck NOTE: 50 RPM, will accept 1/4" drill bit 6 Sagittal Saw, with battery 800 Wire Driver, with battery NOTE: 800 RPM, will accommodate 0.7 mm –1.16 mm or 0.025"–0.062" Call +1-800-343-5717 (U.S.) or contact your local representative. Call +1 800 343 5

Power Instruments Charger, Power Pack and Chuck Key Charger, Power Pack and Chuck Key Reference # * Batteries not included with charger

Power Instruments Sterile, Disposable Saw Blades† Sterile, Disposable Saw Blades For use with Sagittal Saw, REF 2855 Reference # Saw Blade – Standard, thickness: 0.65 mm, length: 63 mm, width: 32 mm (6 per box) Saw Blade – Standard, thickness: 0.89 mm, length: 63 mm, width: 32 mm (6 per box) Saw Blade – Short, thickness: 0.65 mm, length: 29 mm, width: 15 mm (6 per box) Saw Blade – Short, Narrow, thickness: 0.65 mm, length: 29 mm, width: 9 mm (6 per box) Saw Blade – Narrow, thickness: 0.65 mm, length: 63 mm, width: 13 mm (6 per box) Saw Blade – Long, special thickness: 0.89 mm, length: 68 mm,...

Power Instruments DYONICS™ POWER Instrumentation Corded Power Equipment Corded Power Equipment For use with DYONICS POWER Control Unit (see pg. G-1). The drill’s design and choice of modular accessories provide smooth switching of components during arthroscopic surgery. For the sagittal saw, you may choose from multiple blades with varying sizes. Sterilization Parameters Steam, prevacuum (wrapped or unwrapped) Temperature: 132°C Time: 4-min. Dry time: 8-min. Steam, gravity (wrapped or unwrapped) Temperature: 132°C Time: 35-min. Dry time: 8-min. Pistol Grip Drill (requires REF 7205788) Wire Guard...

Power Instruments Corded Power Equipment Reference # Description 7209391 DYONICS POWER high-speed drill (model 6100) 7209394 DYONICS POWER oscillating saw, MicroAire™ interfacelmodel 6710) 7209392 DYONICS POWER reciprocating saw, MicroAire interface (model 6420] 7209395 DYONICS POWER heavy-duty oscillating saw, MicroAire interface (model 6740) 8103998 DYONICS POWER locking wrench 7209393 DYONICS POWER Synthes chuck Call +1 800 343 5717 (U.S.) or contact your local representative.

Power Instruments Wire Driver, Pin Driver, Chucks and Cable Wire Driver, Pin Driver, Chucks and Cable For use with DYONICS™ POWER Control Unit. Reference # Automatic Wire Driver (accepts wires up to 1.6 mm) Automatic Pin Collet (accepts pins up to 3.2 mm) Jacobs Chuck, 5/32" Chuck Key Jacobs Chuck, keyless, 1/8" Jacobs Chuck, 1/4" Chuck Key Jacobs Chuck, keyless, 1/4" Power Cable (from drill and/or sagittal saw to control

Power Instruments Disposable Saw Blades for DYONICS™ POWER Instrumentation Disposable Saw Blades for DYONICS POWER Instrumentation For use with Sagittal Saws REF 7205786 or 7205791. Disposable, packaged 6 per box, sterile. Reference # 7209396 DYONICS sagittal saw blade, 5.8 mm x 12 mm x 0.4 mm, with straight fine teeth, no etchings, depth stop 7209397 DYONICS sagittal saw blade, 5.8 mm x 18 mm x 0.4 mm, with straight fine teeth with markings, depth stop Sagittal Saw Blades (WxLxT) For use with Sagittal Saws REF 7205786 or 7205791. Disposable, packaged 6 per box, sterile. Reference # 7205809 Saw...

Power Instruments Calibrated Sagittal Saw Blades Calibrated Sagittal Saw Blades (WxLxT) For use with Sagittal Saws REF 7205786 or 7205791. Disposable, packaged 6 per box, sterile. Reference # Saw Blade, 19.1 mm x 25.4 mm x 0.4 mm, with markings Saw Blade, 5.8 mm x 25.4 mm x 0.4 mm, with markings Saw Blade, fine teeth, 9.4 mm x 25.5 mm x 0.4 mm, with markings Saw Blade, 9.4 mm x 25.5 mm x 0.4 mm, with markings Saw Blade, 4.5 mm x 25.5 mm x 0.4 mm, with markings 7205895 Saw Blade, 19.1 mm x 25.4 mm x 0.4 mm, with markings and titanium nitride finish 7205896 Saw Blade, 5.8 mm x 25.4 mm x 0.4 mm,...

Call +1 800 343 5717 (U.S.) or contact your local representative.

Power Instruments