OHMEDA SMP Ohmeda medical gas outlets are CE and UL listed as they fully comply with the latest edition of NFPA99 and CGA standards. All outlets are tested 100% for flow, leakage, as well as connectivity, and are cleaned for nitrogen services prior to shipping. A complete medical gas outlet consists of a gas specific rough-in assembly along with a gas specific finished assembly. Wall Type Gas Outlet Console Type Gas Outlet Complies with NFPA 99 & CGA CE & UL approved 360˚ swivel inlet pipe for easy installation 100% individually pressure and leak tested Full range of mounting options Available size in 3/8” & 1/2” of K type copper piping Working pressure up to 100 PSI Optional trim plate to add an aesthetically pleasing finish to any wall outlet The wall type gas outlet includes finished and roughin assembly. The finished assembly shall have a gas specific index corresponding to the gas service on the rough-in assembly which prevents interchanging of the gas service. Each finished assembly shall be color coded for its specified gas service and be molded and shaped with, silver, and processed with sand blasting and painting. The finished assembly is intended for the level connection of the medical gas wall-outlets and filling up neighbor space. Rough-in assembly is available in size 3/8” & 1/2”of K type copper piping and the pipe has a 360˚ swivel for easy installation. The console type gas outlet includes finished and rough-in assembly. The finished assembly shall have a gas specific index corresponding to the gas service on the rough-in assembly which prevents interchanging of the gas service. Each finished assembly shall be color coded for its specified gas service and be molded and shaped with, silver, and processed with sand blasting and painting. The finished assembly is intended for the level connection of the medical gas wall-outlets and filling up neighbor space. Rough-in assembly is available in size 3/8” & 1/2”of K type copper piping and the pipe has a 360˚ swivel for easy installation. Solutions Start Here

OHMEDA Quick Adapters • • • The gas adapters are used to connect medical gas devices to medical gas terminals. Suitable for OHMEDA gas outlet only Color coding is available in both USA and ISO standard Outlet Standard (OHM = OHMEDA) (JIS = JAPANESE STANDARD) (DIN = GERMAN STANDARD) (HTM = BRITISH STANDARD) (DIS = DISS STANDARD) (CHM = CHEMETRON STANDARD) (NIT = NITROGEN) (AR8 = AIR 800) (N28 = NITROGEN 800) (ETX = ENTONOX) (WAG = WASTE ANESTHETIC GAS) Example OHM - WAL - U - OXY - CS Outlet Standard: OHMEDA Standard Type: Wall Type Standard: US Standard Gas: Oxygen Assembly: Complete Set 10 Sims...