Solutions Start Here... Solutions Start Here www.smpcanada.com 10 Sims Crescent, Richmond Hill Ontario, L4B-1K9 Canada Tel: (905) 764-7767 Fax: 1-866-627-9798 [email protected] USER & MAINTENANCE MANUAL www.smpcanada.com | [email protected] | Tel: 1.905.764.7SMP (1.905.764.7767) | Fax: 1.866.627.9798 10 Sims Crescent, Richmond Hill Ontario, L4B 1K
Open the catalog to page 1USER MANUAL MANUAL BED SMP 200ML About Us We are a company that draws on innovation and excellence to provide solutions that enhance the ability for caregivers to effectively fulfill their duties. Our goal is to build a high-performing medical technology company that gives healthcare providers the tools they need to achieve better outcomes. We are committed to helping our customers deliver safer, more efficient, technologically advanced equipment to the market place. Caregivers throughout the world look to us for solutions because we strive for excellence and adhere to their suggestions for improvement....
Open the catalog to page 2USER MANUAL MANUAL BED SMP 200ML 2 Crank Manual Hospital Bed - User & Maintenance Manual
Open the catalog to page 3USER MANUAL MANUAL BED SMP 200ML General Remarks We congratulate you on your choice of an SMP-200ML hospital bed and would like to thank you for your confidence in our product. You have purchased a SMP-200ML Hospital Bed developed and manufactured in accordance with the current state of technical knowledge. SMP Canada’s manual hospital bed fully meets all safety and operational requirements. They are tested in accordance with international standards and carry the CE seal. This confirms that they fulfill the safety requirements relating to medical products. This user manual is intended to give...
Open the catalog to page 4USER MANUAL MANUAL BED SMP 200ML
Open the catalog to page 5USER MANUAL MANUAL BED SMP 200ML
Open the catalog to page 6USER MANUAL MANUAL BED SMP 200ML 1.1) Removeable Headboard and Footboard for easier access to the patient SMP’s ergonomic design allows the care givers to have access to the patient’s head or feet by instantly removing the headboard and footboard. See section 10.5 for details. 1.2) Dual manual crank system SMP-200ML bed allows you to adjust the bed in 2 different positions i.e. A) Manual adjustment of upper leg. B) Manual adjustment of the backrest. See section 9, 10.1, and 10.2 for more details. 1.3) Side rails The SMP-200ML is equipped with retractable aluminum side rails which can be used...
Open the catalog to page 7USER MANUAL MANUAL BED SMP 200ML 1.7) 5’’ castors for easier maneuverability SMP-200ML is ergonomically designed for the safety of the care givers and the patients. We understand that it can take a toll on the care givers body by pushing the bed with patients in it from one room to another. That is why we have designed and installed 5” castors on our bed so the care givers can have a lot less strain on their body while pushing the bed. Our castors have passed the load bearing test of the European council directive 2002/95/EC & 2005/618/EC. 1.8) Side bumpers In emergency situations, when you are...
Open the catalog to page 8USER MANUALMANUAL BED SMP 200ML2.) Technical Data: No.
Open the catalog to page 9* Product withstands storage/transportation in relative humidity range of 10 to 95% * Product withstands storage/transportation in relative humidity range of 10% to 3.) Warranty and liability We accept liability for possible errors and omissions within the terms of warranty laid down in the main contract. Claims for damages - from whatever legal ground they may be held to derive - are expressly excluded. We reserve the right to make technical changes to the hospital beds described in this user’s manual in accordance with technical developments. We accept no liability whatsoever for damage and/or...
Open the catalog to page 10USER MANUAL MANUAL BED SMP 200ML WARNING! – Increased safety measures are necessary when the bed is being used: By a child under 12 years of age. By a person with reduced mental faculties. For psychiatric purposes. WARNING! – In order to avoid falls, always return the bed to lowest position after each use of the adjustment functions. Make sure that: a) The bed is in lowest position before getting into or out of it, and b) The brakes are applied. WARNING! – Safety frames only mark the limits of the bed. Other appropriate measures must be used to restrain patients. WARNING! Only use original...
Open the catalog to page 11USER MANUAL MANUAL BED SMP 200ML 4.5) Side Rails - Danger of entrapment In the case of patients whose, physical or mental state may be felt to call for the use of side rails to protect them from falling out of bed, the following safety measures must be observed at all times: 1. Side rails may be operated only by care givers instructed in their use. 2. Make sure side rails – or elements of them – are either fully raised and Locked or fully lowered. 3. During the adjustment of the mattress-frame, make sure that the Patient is not touching the side rails. Also make absolutely sure that no Limbs...
Open the catalog to page 12USER MANUAL MANUAL BED SMP 200ML 6.) Before using the bed for the first time Before the bed is put into service for the first time, this user’s manual must be closely read by all those responsible for nursing care. Before the bed is put into service for the first time, it is absolutely essential to carry out a functional test. Before first use, care givers must receive detailed instructions on the operation of the bed. In addition, care givers must be made fully aware of potential dangers that can arise in spite of the correct operation of the bed. 6.1) Functional test A functional test must...
Open the catalog to page 13USER MANUAL MANUAL BED SMP 200ML Follow these instructions when using cleaning agents and/or disinfectants: − Decontaminants in the prescribed concentrations may not exceed or fall below a pH value of 6-8. − They may not contain any corrosive or caustic substances. − They may not contain any substances that alter surface finishes or the Adhesive properties of plastics. − They may not affect the properties of lubricants. − Water hardness may not exceed 0.9 mmol/l (to 5° d). Fully desalinated water may not be used. Chloride < 100 ppm Silicate as Sio2 < 15 ppm Iron < 0,05 ppm Manganese < 0.01 ppm...
Open the catalog to page 142 Pages
1 Page
14 Pages
21 Pages
28 Pages
2 Pages
1 Page
13 Pages
20 Pages
23 Pages
23 Pages
23 Pages
9 Pages
1 Page
1 Page
1 Page
3 Pages
2 Pages
1 Page
1 Page
26 Pages
15 Pages
2 Pages
2 Pages
3 Pages
2 Pages
2 Pages
2 Pages
1 Page
1 Page
2 Pages
2 Pages
1 Page
1 Page
1 Page
1 Page
2 Pages
2 Pages
2 Pages
2 Pages
1 Page
1 Page
1 Page
54 Pages