DESCRIPTION Module with buttons for nurse call, presence set and call cancel. With built display. GENERAL FEATURES - Graphic LCD display of 128*64 points, highly visible. - Red pushbutton for nurse calls from the room. - Green pushbutton to set nurse presence, to cancel a call and to set a reminder. - Information, through the display, of the origin and type of calls. - It allows the nurse present in the room to see if there is a call from another room, to know who is calling and to identify the type of call. The red key (3) is used to make a nurse call from the room (if the presence of a nurse has not been registered) or to make a priority request for help (if the presence of a nurse in the room has been registered). In systems with intercommunication with other rooms (module PCH6021 is required) press button (2) for marking a reminder. It is indicated in display. The LCD allows the nurse present in the room to see if there is a call from another room, to know who is calling and to identify the type of call. WIRING EXAMPLES WIRING DIAGRAM 1: Voice communication systems between the nurse control station and the rooms, and between the nurse in a room and other rooms. Functions: Nurse call, setting presence, cancelling calls, and setting a reminder. CONNECTION Before connecting the device, ensure that it is not connected to the mains supply. Insert the control in the support and connect up in accordance with the following instructions. 4 - Ground (cable at least of 1 sq mm) 2 - 16 V DC supply 7 - Audio (Voice communication) AVISOS - Connection to PCH6021 module MIC/ALT - Connection to module PCH6022 WARNING: The system cabling should be installed separately from the mains electricity supply in accordance with regulations. TECHNICAL CHARACTERISTICS Supply voltage: 16VDC Maximum consumption: 90 mA OPERATION The unit has 2 buttons. The green button (2) is used to register the presence in the room by pressing the button the first time. The second press of the button (2) is to signal the lack of presence in the room or to cancel all nurse calls made in the room.

Voice communication systems between the nurse control station and the rooms. Functions: Nurse call, setting presence and cancelling calls. Systems with no voice communication. Functions: Nurse call, setting presence and cancelling calls. PCH6025 PCH6022 PCH6025 These characteristics are only given as reference. The manufacturer reserves the right to introduce any amendments without prior notice.