*mymedicalexpo

SONO-PR 200

Product catalog summary

Introduction
The SONO-PR 200 is a broadband ultrasonic pulser-receiver designed for nondestructive testing, offering a frequency response up to 200 MHz and low noise levels. It is a modern device that replaces outdated technology, providing clear signals for various applications.

Key Features

High bandwidth from 0.1 MHz to 200 MHz.
Extremely low noise level, especially when combined with the optional SONO-AMP pre-amplifier.
Multiple high-pass and low-pass filters available.
Digital inputs and outputs with remote control via serial interface.
Customizable functions and technical features to meet specific needs.

Applications

Precise wall thickness measurement.
Nondestructive material testing.
Probe characterization in R&D.
Immersion and squirter applications.
Integration into automated testing systems.
Acoustic microscopy.

Technical Specifications

Operating temperature: 0°C to +60°C; Storage temperature: -20°C to +80°C.
Display: 4.3" LCD TFT color screen with touch panel.
Power supply: 110/220 VAC, 1 A, 50/60 Hz.
Spike pulser with pulse repetition frequency of 10 Hz to 20 kHz and energy levels from 1 to 32 μJ.
Receiver gain options: 26, 40, 54 dB with attenuation range from 0 to 65.5 dB.
Communication via RS-232 interface.

Variants and Customization

Available in spike pulser and square wave pulser configurations.
Customizable voltage, pulse width, and damping options.
Optional SONO-AMP pre-amplifier for additional gain and reduced noise.

Compliance and Certification

Certified according to ISO 9001.
Complies with standards 2011/65/EU RoHS, 2014/30/EU, 2014/35/EU, and DIN EN 61326-1:2013.

Contact Information
SONOTEC GmbH, Nauendorfer Str. 2, 06112 Halle (Saale), Germany. Phone: +49 345 133 17-0, Email: [email protected], Website: www.sonotec.eu

Catalog excerpts

SONOTEC onic pulser-Receivsf Broadband UltrasoniC Pu Ultrasonic Testing

Open the catalog to page 1

SONO-PR 200 reliably replaces obsolete technology → SONOTEC has specialized in customised ultrasonic solutions for over 30 years. → The SONO-PR 200 is a broadband utrasonic pulser-receiver with exceptional performance. It has a frequency response of up to 200 MHz and an extremely low noise level. → It is a state-of-the-art device manufactured with the latest components. → The SONO-PR 200 delivers a clear signal without compromise. Features Very high bandwidth Numerous high-pass & low-pass ﬁlters Digital inputs and outputs Remote control via serial interface Option: pre-ampliﬁer with 20dB gain...

Open the catalog to page 2

Which SONO-PR 200 is right for you? SONO-PR 200 Variants Spike pulser ggggPulser Spike Pulser Fixed + voltage Energy steps Pulser rising time (below 1 ns) Pulser rising time + (below 1ns) Square wave pulser Rectangular Pulser Fixed voltage Pulser polarity (unipolar +, -, bipolar) Selectable square wave width Selectable pulser width Square wave frequency 500 kHz to 8 MHz * only possible for certain configurations Tailor the device for your case! If you wish to adapt functions or technical features, please let us know. We can take your individual wishes and adapt the solution to your nee

Open the catalog to page 3

Protection type IP20 Increment: 0.5 I 6 dB Impulse-Echo, Pulser-Receiver 4.3" LCD TFT colour screen display 480 x 272 pixels, touch panel Equivalent input maximum: 2 nV/VHz* noise level typical: < 1 nV/VHz * Gain: 54 dB; attenuation: 0 dB; full bandwidth Dimensions 19", 2 U (rack units) Spike pulserTrigger Source Internal and external Open circuit voltage 277 V Interfaces Communication RS-232 (9 pin D-sub male) Switch output 4 x 5 V 200 mA, short circuit proof SONO-AMP (optional) Square wave pulser 10 to 100 V (at damping 50 Q) 20 to 200 V (at damping 1 kQ) Polarity Unipolar- Pulse width (corresponds...

Open the catalog to page 4

SONO-PR 200

SONO-PR 200

Catalog excerpts

All SONOTEC GmbH catalogs and technical brochures