BED HEAD UNITS KABEL SERIES

INTRODUCTION GUIDE TO SYMBOLS KABEL SERIES BED HEAD UNITS Electrical and signal distribution Type of electrical parts Nurse call Structural characteristics CLASSIFICATION ACCORDING TO CARE INTENSITY LEVEL KABEL SERIES SPINN LARGE SUSPENDED UNITS TECHNICAL DETAILS KABEL BED HEAD UNIT PROFILES KABEL SERIES TECHNICAL CHARACTERISTICS

Sure, it's Sostel For more than 40 years, Sostel has been selling its systems and equipment for use in healthcare, safety and communication on the Italian market. Sostel offers expertise and in-depth knowledge of the industry, working in support of healthcare companies and facilities in the choice of optimum solutions for hospitals, clinics and nursing homes. Sostel uses a sales network that operates all over Italy, able to provide professional assistance to its customers, identifying their needs and offering cutting-edge solutions; an expert technical division is able to ensure maximum efficiency...

Guide to reading symbols INFORMATION AND GENERAL CHARACTERISTICS "P" PROFILE - Dimensions (LxHxD) LOW/MEDIUM CARE (medium/low) "D" PROFILE - Dimensions (LxHxD) MEDIUM CARE (medium) DIMENSIONS (LxHxD) MEDIUM/HIGH CARE (medium/high) HIGH CARE (high) WEIGHT - Expressed per linear metre IP PROTECTION GRADE

SOSTEL KABEL SERIES CONFIGURATION, TECHNICAL CHARACTERISTICS AND MODULES POWER SOCKETS/MODULES DATA CONNECTION SOCKET/MODULE FLUORESCENT LIGHTING T5/T8 - Direct/Indirect NURSE CALL SOCKET/MODULE MODULES OR ACCESSORIES IN BASIC CONFIGURATION GAS OUTLETS - Max no. outlets available on the model OPTIONAL MODULES OR ACCESSORIES FINISH COLOUR - RAL® colour of choice

Kabel series bed head units STRUCTURAL CHARACTERISTICS Designed and built according to the provisions of the directive on medical devices 93/42/EEC, KABEL series bed head units combine technical solutions and functional use devised to provide the best possible support to healthcare workers in their tasks and to make patients’ stays more comfortable. Designed for hospital environments, clinics and nursing homes, they are designed to diffuse light correctly as well as to meet ergonomic and aesthetic criteria. STRUCTURAL CHARACTERISTICS The different models are made to be modular, combining extruded...

SOSTEL KABEL SERIES CUSTOMISATION The bed head units in the KABEL series can be customised according to the following choices: Number of beds Total device length Fastening to wall or ceiling Colour and surface finish Type and number of electrical components Type and number of medicinal gas outlets Accessories: instrument bar, IV unit hooks, supports for monitors, etc. MODULARITY The bed head units from the KABEL series are made by combining two or more profiles, inside which are separate channels for the following functions: Lighting Distribution of electricity (strong current), alarm signal...

LIGHTING Bed head units from the KABEL series can be made with LED lighting light fitting, made in aluminium or steel is shaped in such a way as to achieve the optimum orientation of the light beam, treated for the best possible reflectivity. This section contains all of the light elements, including chargers, lamp holders or LED modules and the relevant wiring. Designed for rapid replacement in case of failure and slotted in to the structure of the bed head unit and easily disconnected using a snap-on connector. The light parts of the bed head unit are protected by polycarbonate shields. FLUORESCENT...

SOSTEL KABEL SERIES ELECTRICAL AND SIGNAL DISTRIBUTION According to model, the electric modules the bottom, angled part of the bed head unit, or in the front part. In both configurations, all elements (switches, power sockets, data sockets, equipotential sockets) are close to the patient and easily accessible to medical and care staff. When the electrical modules are located in the front of the device, the support panel is pressed into the profile of the bed head unit, without using screws and maintaining an IP40 tion grade. When open, the front panel is supported on special metal cords to ensure...

SOSTEL KABEL SERIES Classification according to care intensity level The modular and flexible bed head units from the KABEL series are made according to the specific needs of the customer and designed to meet any requirements of healthcare and assistance facilities. Different models meet the needs of different care intensities: from low-intensity in-patient wards to rehabilitation and highinten-sity wards, such as intensive and sub-intensive care. CARE INTENSITY CLASSIFICATION CARE INTENSITY SPINN LARGE MEDIUM CARE (medium) HIGH CARE (high)

SOSTEL KABEL SERIES Kabel Series

LOW/MEDIUM CARE Data sockets Electrical equipment Nurse Call Equipped with direct and indirect light, the Jib bed head unit consists of a single profile containing the lighting section and electrical parts, located in the angled bottom section of the device. LOW/MEDIUM CARE Data sockets Electrical equipment Nurse Call Jib Gas consists of 2 profiles: the first type has a light fitting and electrical equipment, located in the angled bottom section of the bed head unit, and the second, which is mechanically, separated, contains the medicinal gas tubes. The gas outlets (up to 4) are located in a...

SOSTEL KABEL SERIES RECOMMENDED CONFIGURATION Jib LED 1030 COMPACT, BASIC EQUIPMENT, IDEAL FOR NURSING HOMES BASIC EQUIPMENT LED LIGHTING Ambient light with wall switch and reading light with bed head unit switch ELECTRICAL MODULES - Flush socket assembly 1 10/16A Unel socket, 1 10/16A bypass socket, 1 single-pole switch for examination light (indirect + reading) or 2 Unel sockets (10/16A) Ready to fit nurse call EXTERNAL FINISH White epoxy coating, RAL® 9010. Available in other standard RAL® Jib LED 1300 COMPLETE AND VERSATILE FOR GENERAL CARE WARDS BASIC EQUIPMENT LED LIGHTING Indirect light...

LOW/MEDIUM CARE Data sockets Electrical equipment Nurse Call Extremely compact bed head units which, in just 85 mm includes all the equipment for direct and indirect lighting, as well as ducting for electrical parts. OPT Integrated medical rail in stainless steel (30x10mm). LOW/MEDIUM CARE Data sockets Electrical equipment Nurse Call Van Gas has a compact structure that only projects 85 mm from the wall. It consists of 3 profiles: 2 for lighting and 1 in the centre to distribute electrical services, to duct gas tubes and to house medical gas outlets. The routes for ducting wiring and gas tubes...