Clipper Series
28Pages

Clipper Series Industrial Plastic Connector

Clipper Industrial Plastic Connectors The company designs, manufactures and markets high performance interconnect solutions for severe environments from industrial broadline and universal ranges to complex system with integrated functions: filtering, high speed data transmission, hermetic seal, separation mechanism, remote handling, underwater mating,... Equipment & system SOURIAU was established in 1917 and has been created by successive acquisitions of the industrial, aeronautical, defense and space activities of SOURIAU, JUPITER and BURNDy. The Group's products are engineered and...

Clipper Industrial Plastic Connectors Contents Description/Features/Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Square flange receptacle and in-line receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical thread backshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Stamped...

Description Retention plate principle Features Mechanical • Monobloc shell and insulator in thermoplastic material self-extinguishing to UL 94 V0. • 180° screw coupling with positive audible safety latch. • Scoop proof. • Copper alloy contacts, machined or stamped and formed • plating : gold on active part over nickel. • Mechanical endurance : - connector : 250 cycles mating / unmating, - retention plate : 50 cycles mating / unmating. • Retention force : - # 20 ^ 70 N - # 16 ^ 90 N. • Vibration : - frequency range : 10-2000 Hz, 20 g - 10 cycles in accordance with CEI 68-2-6 Locked plate...

Clipper Industrial Plastic Connectors Available Style Square flange receptacle and in-line receptacle Part number Receptacle types without contacts Unsealed receptacle (without o’ring) Sealed receptacle (with o’ring) for use with backshell Sealed receptacle (with o’ring and panel gasket) In-line receptacle Contacts layouts for male contacts unsealed for male contacts sealed for male contacts Shell sizes

Clipper Industrial Plastic Connectors Plug and backnut Part number Plug types without contacts Unsealed plug (without o’ring and mating seal) Sealed plug (with o’ring and mating seal) Sealed backnut Unsealed backnut Grommet O ring Thrust ring Contact layouts for male contacts for male and female contacts Shell sizes

Clipper Industrial Plastic ConnectorsElectrical thread backshells (PG) Unsealed (IP40) Sealed Description Note: Electrical thread backshells are always supplied complete with the adaptor.

: with panel gasket

Crimp Contact with strain relief Part numbers 0 mm over insulation (inches) ^Plating RF : gold flash on active part for standard version (For other platings, consult FCI) Assembly Filler plug # 16(for un-used contact cavities) Filler plug # 20(for un-used contact cavities) Part number : 8500 479 CL Polarization Contact c=^ z (instruction for polarizing connector - see page 23) Print Circuit (PC) Tail Machined Contact

Clipper Industrial Plastic Connectors Machined contacts Contact types Part numbers crimp male insulation (inches) solder male crimp male solder male Plating MQ : 0.4µ mm gold on active part (.016µ inches) Extended ground contact-crimp (Length + .039 inch = +1 mm) male

IP68 Configuration (temporary water tightness down to 100 feet) Panel gasket Wall mount receptacle Anti-decoupling sealing gland backshell

Clipper Industrial Plastic Connectors IP68 Configuration Part numbers Shell types (without contacts) and Backshell type Sealed receptacle (with o’ring and panel gasket) Sealed In-line receptacle Sealed plug (with o’ring and mating seal) Anti-decoupling sealing gland backshell Contacts layouts for male contacts Shell sizes

IP67 Configuration (temporary water tightness) Sealed Backnut Thrust ring Wall mount receptacle Panel gasket Elbow backshell with sealing gland flexible conduit systems mating seal Anti-decoupling sealing gland backshell

Clipper Industrial Plastic Connectors IP67 Configuration Part numbers Shell types without contacts Sealed receptacle (with o’ring and panel gasket) Sealed plug (with o’ring and mating seal) Sealed In-line receptacle o’ring Contact layouts for male contacts Shell sizes

Clipper Industrial Plastic Connectors IP67 Configuration Part numbers Backshell types Sealed backnut Elbow backshell with sealing gland Straight backshell for Anti-decoupling sealing flexible conduit systems gland backshell Grommet O ring Thrust ring Contact layouts for male contacts

Overall dimensions in inches For other needs, consult FCI.

Clipper Industrial Plastic Connectors Manual Crimping Tool Stamped and Formed Contacts (#16 and #20) • Squeeze the plier handles until a final click sounds, release, the pliers should open by themselves. • Fully insert the contact into the locator (corresponding gauge), the contact crimping lugs should be directed upwards, according to the drawing. • Put the stripped wire in the crimping part until it comes in contact with the stopper plate. Make sure that no strands stick out of the crimping part. • Squeeze the plier handles until a final click sounds, release, the pliers should open by...

UTM2 Automatic crimping tool for Clipper Description Electromechanical high speed semi automatic press is designed for mass production and is realized totally in assembled steel parts. Voltage: 115VAC - 60 Hz crimp mechanism) Dimensions: 939.8x533.4x711.2 mm Crimping Mechanism (left side miniapplicators) Press and crimping mechanism are rental. Please contact Customer Service.

Panel mounting There are two types of mounting possible: through the front or through the back of the panel.

Wiring Instruction Stripping Instructions Use the upmost care with stripping operation : • Use stripping pliers appropriate for the cable gauge and which are in perfect condition. • In order to obtain a correct crimping and to maintain all of the connector sealing characteristics, the wires must have the dimensions described below. Shell size carefully make an incision in order to remove the cable protection on a length LD as described. Caution : This operation should be realized without deterioration of wires insulation. Then, follow the normal stripping instructions : - single wire with...