D-Subminiature Series Rectangular Connectors

D-Subminiature Series Presentation • Souriau D-Sub connectors are used for military/aerospace applications and in industrial field: information systems, communication systems, industrial electronic... • D-Sub connectors are designed to ensure the connection fonction in all applications where weight and dimension are very important. • They are especially used as Input/Output connectors in interface fonctions. So, they are subjects to mechanical constraints that are sometimes severes. • In order to prevent risks (pulling up, accidental unmating...), a large range of accessories is supplied.

D-Subminiature Series

D-Subminiature Series D-Sub Mark III standard ranges ► Compliant to MIL-C- 24308 ► Crimped contact #20 Hermetic Series See page 21 ► Solder buckets and eyelets ► Straight spills & Crimped contact #20 ► Hermeticity level: 10-7 atm.cm3/s ► Individual glass bead ► High Density ► Individual glass bead ► Straight sp

D-Subminiature Series Layouts Male insulator front view Contacts are individually numbered on both side of insulator. Standard connectors: 8630/1 (HE501/HE508), SMA and Hermetic High density connectors: 8635

D-Subminiature Series PCB drilling dimensions (mm) for solder version Standard connectors: 8630/1 (HE501/HE508), SMA and Hermetic Note: ØA=0.9mm for HE501, HE508 and MIL C. High density connectors: 8635

D-Subminiature Series

8630 Series HE501 Connector accomodating removable machined crimp contacts for 20/24 or 26/28 AWG wires In compliance with NFC 93425/HE501 Standard shell plating: Cadmium Other platings: Tin & Zinc Ordering information Basic Series Basic Series (float mounting) 8630 8631 Option None: Standard L: Clinch nut M3 (8630 only) O: Clinch nut UNC 4.40 (8630 only) V: Female screw lock UNC 4.40 (8630 only) Number of contacts 09, 15, 25, 37, 50 Contact type P: Pin S: Socket Contacts None: With standard 20/24 AWG contacts L: Without contacts Rear type None: Standard H: Shielding termination fingers (only...

Connector accomodating removable machined crimp contacts for 20/24 AWG wires For heavy duty applications Class -55°C to +125°C Standard shell plating: Cadmium Other platings: Tin & Zinc Special proof version Basic Series 09, 15, 25, 37, 50 Contact type P: Pin S: Socket Specification None: Standard 012: Splash proof 015: Dust proof Contacts None: With standard 20/24 AWG contacts L: Without contact HE508 coding N: Mandatory for standard version (not for 012 Splash proof version and for 015 Dust proof version) Rear type None: Standard H: Shielding termination fingers (only for T plating) Shell plating...

Special proof versions (available in HE508 Series only) Examples: 8630 25 P012 012: Splash proof version, grommet + potting = male interface seal conform to IP65. 8630 25 P015 015: Dust proof version, rear grommet only.

D-Subminiature Series MIL C 24308 C Connector accomodating removable machined crimp contacts for 20/24 AWG wires Basic Series Option None: Standard F: Float mounting Contact None: With MIL contacts L: Without MIL contacts QPL version N: Mandatory for classified QPL version Diameter of insulator cable max: 1.6 mm. This serie can be ordered directly with MIL part number.

Crimp contact for AWG 20/24 wire

8635 Series High density connector SOURIAU 8635 connector for aerospace and military applications offer high density (size 22) crimp and straight spill contacts in standard A, B, C, D, E shells. The 8635 connector meet the requirements of MIL C 24308 dust and splash proof specifications. Standard shell plating: Cadmium Other platings: Tin & Zinc Specification None: Standard 012: Splash proof 015: Dust proof 017: Straight spills Contacts None: With standard 20/24 AWG contacts L: Without contact Rear type None: Standard H: Shielding termination fingers (only for T plating) Shell plating None: Cadmium...

Straight spill version (spec 017) Dimensions Standard version (crimp contacts) Contact part numbers

Solder bucket Locking stud Tapped hole Shell size

D-Subminiature Series Part numbers & specifications

Shell size

D-Subminiature Series

It is recommanded that only one pair of connectors should be float mounted. Rigid mounted connectors require 2 screws 03mm. Float mounting connectors require 02mm. ' Shell size

D-Subminiature Series Shell dimensions

D-Subminiature Series Mounting options 8630 and 8635 Series (dimensions in mm.) F: Float mounting V: Female screw lock UNC 4-40 6.03 Max.

© Copyright SOURIAU November 201 - All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. 1