JBX Series - Metal Push Pull Connector
292Pages

Push-Pull Coupling Mechanism

Technical Information

JBX SERIES © 2015 SOURIAU - SOURIAU is a registered trademark

© Olivier Tuffé / Fotolia Instrumentation / Measurement Telecom - Data infrastructure Building Automation & Control © Sergey Milovidov / Fotolia Robotics - Machine tools Off road - Mining - Railway © Volodymyr Kyrylyuk / Fotolia © Rainer Plendl / Fotolia Typical Applicat

JBX Series | Overview Features & Benefits IP68 in Mated and Unmated Conditions Ideal for outdoor applications with temporary or continuous water immersion and dust protection. Overview WATER PROOF 360° EMI Shielded Signal integrity Less than 5mΩ: Qualified and Compatible to be used in electromagnetic radiation areas and ensures proper signal integrity and transmission. High Density Layouts Space saving Ideal for compact devices due to small footprint. The use of 0.5mm contacts along with miniature housing makes it suitable for tight applications. Push Pull Locking Mechanism Reliable mating...

JBX Series | Overview Range JBX IP40 Protective Boot Choice of Contact termination • Crimp FC: Right Angle Plug FF: Straight Plug no Latch with Black Boot FN: Straight Plug with Lanyard FM: Right Angle Plug with Lanyard ED: Protuding Front Mount EP: Rear Mount Receptacle* ER: Front Mount Receptacle EZ: Rear Mount Receptacle with Mounting Pins PC: In Line Cable Receptacle SA: Rear Mount Cable Receptacle SR: Front Mount Cable Receptacle Choice of Contact termination • Crimp • Straight PCB Tails Protective Boot

JBX Series | Overview Overview JBX IP68 Protective Boot Choice of Contact termination • Crimp HC: Rear Mount Receptacle* Available size 0 HD: Protuding Front Mount Receptacle Available size 0 HH: Front Mount Extended Receptacle Available size 0 & 2 EC: Double Nut, Front or Rear Mount Receptacle * Available size 2 Choice of Contact termination • Crimp • Straight PCB Tails

(Electrical parameter according to UL1977) Note: Contacts are numbered Counterclockwise in the plug and clock wise in the receptacle.

JBX Series | Overview Contact Mixed Contact Shell size JBX Sealed in Unmated Condition

Materials • Outer shell and collet nut: Brass • Latching sleeve: Brass • Shielding ring: Brass • Nut: Brass • Half bushes: Brass • Clip: Beryllium copper • Insert: PEEK • Collet: PA 6/6 + MoS2 • Cable seal: Silicon rubber • Contacts: See every layout pages • Halogen free Environmental • Operating temperature: from -40°C to +125°C • Flammability rating: UL94 V-0 • Salt spray: per MIL-STD-202 method 101 - 48 h (nickel chrome) - 96 h (black anodized coupling ring) Higher salt spray resistance (200/500 h) upon request • Sealing: - Dynamic IP40 / IP68 in mated condition - Sealed IP68 connectors...

JBX SERIES © 2015 SOURIAU - SOURIAU is a registered trademark

Connector IP40 Part Number Contact type * In order to get the back nut for protective boot please add «M» after the last «S». Example: JBX Straight Plug, size 00, 2 solder contacts, male insert = JBXFD00G02MSSDSMR. The protective boot need to be ordered separately, see page accessories. (1): In order to get a black Chrome over Nickel please replace «S» before the «D» by one «N». Example: JBX Straight Plug, size 00, 2 solder contacts, male insert = JBXFD00G02MSNDSR.

JBX00-02 - IP40 (2 x 0 0.5mm) Dimensions (For mated connector lengths see page 19)

Plug Dust Cap Part number Protective Boot Available only for FD & FG, with back nut protective boot | [j] Part number

For more information see page 231 FD Plug + Receptacle Connector Electrical Characteristics UL 2A 500V UL94 V-0 Note: all dimensions are in mm

Connector Part Number Contact type * In order to get the back nut for protective boot please add «M» after the last «S». Example: JBX Straight Plug, size 0, 2 solder contacts, male insert = JBXFD0G02MSSDSMR. : First choice The protective boot need to be ordered separately, see page accessories. (1): In order to get a black Chrome over Nickel please replace «S» before the «D» by one «N». Example: JBX Straight Plug, size 0, 2 solder contacts, male insert = JBXFD0G02MSNDSR.

JBX0-02 - IP40 (2 x Ø 0.9 mm) - See waterproof IP68 version page 22 Dimensions (For mated connector lengths see page 25) Rear Mount (EP) Protruding Front Mount (ED) 18.2 In Line Cable Receptacle (PC)* Front Mount Cable Receptacle (SR)* Standard version Standard version Boot version Right Angle Plug (FC)* Straight Plug (FD)* Standard version Boot version PCB Rear Mount with Mounting Pins (EZ) Right Angle Plug with Lanyard (FM)* Straight Plug with Lanyard (FN)*

JBX0-02 - IP68 (2 x 0 0.9 mm) - See non sealed IP40 version page 20 FH * In order to get the back nut for protective boot please add «M» after the last «S». Example: JBX Straight Plug, size 0, 2 solder contacts, male insert = JBXFH0G02MSSDSMR. : First choice The protective boot need to be ordered separately, see page accessories. 1: In order to get a black Chrome over Nickel please replace «S» before the «D» by one «N». Example: JBX Straight Plug, size 0, 2 solder contacts, male insert = JBXFH0G02MSNDSR. : Sealed in Unmated Condition

JBX0-02 - IP68 (2 x Ø 0.9 mm) - See non sealed IP40 version page 20 Dimensions (For mated connector lengths see page 25) Protruding Front Mount (HD) Straight Plug (FH)* Standard version 38 Front Mount Extended (HH) Boot version

Insulating Washer Protective Boot Available only for PC - FC - FD - FM - FN - SR - FH, with back nut protective boot Part number Part number Tooling Crimp Tooling Locator Extraction Tool MIL-22520/7-01 Part number

Contact type Contact locking type For more information see pages 231 to 234 Mated Connector Length FD or FN Plug + Receptacle Electrical Characteristics UL 10A 660V UL94 V-0 Note: all dimensions are i