JMX Series - Plastic Push Pull Connector
84Pages

Plastic Push-Pull Coupling Mechanism Connectors for Medical Applications

Technical Information Appendices Appendices Technical Information

JMX SERIES © 2018 SOURIAU - SOURIAU is a registered trademark

Patient Monitoring © sfam photo / Shutterstock Diagnostic Device & Imaging Physio & Medical Therapy © Evgeny Varlamov / Fotolia Typical applications Laboratory Equipment © everything possible / Shutterstock © Tyler Olson / Fotolia Surgical & Dental Systems - Instrumentat

JMX Series | Overview Features & Benefits Only requires two fingers to mate/unmate securely with an audible and tactile indicator. Capable of mating over 2,000 times. Keyings and color identifications are available to avoid accidental system mating errors. Reliable mating: Push-Pull Locking Mechanism Waterproof: IP68 in Mated and/or Protect Unmated Condition your JMX Series will protect your equipment from fluid ingress and liquid equipment projection. Adapted for the Medical Market STERILIZATION Withstand to autoclave steam sterilization with pre-vacuum and gravity displacement process per...

JMX Series | Overview We have thought of everything... Waterproof – IP68 n A rubber gland certifying the sealing between the cable and the plug n Compound on solder receptacles ensuring the IP68 Rubber sealing gland A Full Solution Offering (see page 16) n IP68 and Overmolded Cable Assembly solutions available in standard or custom designs n Withstands autoclave process n A date code (Year - Week) available on the plug and receptacle to ensure full traceability n Not visible once installed Ergonomic / Aesthetic design n An instinctive feeling design with your fingers n Keying and color...

JMX Series | Overview Range overview JMX IP50 Choice of contact termination • Crimp Choice of contact termination Choice of contact termination ER: Front mount Receptacle, Nut fixing EP: Rear mount Receptacle, Nut fixing • Crimp • Straight PC tail JMX IP68 Choice of contact termination • Crimp Choice of contact termination Choice of contact termination HH: Front mount Receptacle, Nut fixing HC: Rear mount Receptacle, Nut fixing • Crimp • Straight PC tail

JMX Series | Overview Layouts Voltages shown below are Test Voltages measured according to the IEC 60512-2 test 4a. Test voltage corresponds to 75% of the mean dielectric withstanding voltage. Operating voltage could be calculated following the method: Test Voltage 3 Please refer to the connector section for the UL and IEC voltage values. Contacts Ø 0.5mm / Ø 0.019" Solder Wire: AWG 28 and smaller Crimp Wire: Not available Shell size Contacts Ø 0.7mm / Ø 0.027" Solder Wire: AWG 22 and smaller Crimp Wire: AWG 22 - 24 - 26 Contacts Ø 0.9mm / Ø 0.035" Solder Wire: AWG 22 and smaller Crimp...

Materials • Shell: PEI • Insert: PEEK • Collet: PEI • Cable seal: Silicon rubber • Clip: Beryllium copper • Contacts: Cupro-Nickel • Contacts plating: Gold • REACH compliant • Biocompatibility: Shell material biocompatible to USP Class VI / ISO 10993 Environmental • Operating temperature: - Receptacle: -20°C +100°C / -4°F +212°F - Plug: -40°C +125°C / -40°F +257°F - Short term (autoclaving): Resistance up to + 134°C / 273.2°F • Flammability rating: UL94 V-0 for the shell UL94 HB for the insert • Sealing (if used with the appropriate cable dimension): Electrical • Compliant to uL 1977 and...

In applications where similar connectors are used next to each other, mismatching can cause disturbances, system failures or even danger to operating personnel. To eliminate mismatching, JMX connectors are offered with discrimination keys to avoid interconnection system errors. In addition to the keyings, SOURIAU offers 5 color codings on receptacle and plug to help the user to identify the correct connector. Each color is linked to a polarization key. Below you will find the correlation table. JMX color identification remains visible in mated condition. Viewed from front face receptacle G...

Basic Series JMX FH 1 G 02 M S UDS U Shell type: FH Straight Plug IP68 FD Straight Plug IP50 HH Front Mount receptacle IP68 HC Rear Mount receptacle IP68 ER Front Mount receptacle IP50 EP Rear Mount receptacle IP50 Shell size Keying: A, B, C, D, E ,G - see table page 12 Layout: See table page 10 Gender: M Male F Female Contact termination: S Solder C Crimp P Straight PC tail (Only for receptacle) Q 90° PC tail (Only for rear mount receptacle) Material: PEI Color Identification: see table page 12 U No color identification A Blue R Red V Green O Orange J Jaune please note that this table...

JMX SERIES © 2018 SOURIAU - SOURIAU is a registered trademark

JMX Series | Connector Overmolded cable assembly © santypan / Shutterstock - SOURIAU SOURIAU has provided connectors for various applications for more than 90 years and has been used in the most extreme environments. Conscious about the difficulty in finding a quick and reliable harness manufacturer, we developped our own in-house overmolded cable assembly production. It allows customers to reduce the number of suppliers and to take advantage of the “best in class” quality of the SOURIAU group. Overmolding is a process that further enhances the sealing properties and helps to minimize...

JMX Series | Connector JMX overmolded cable assembly Overmolding description Cable outer sheath Connector with cable gland backshell If cable jacket is breached... ...water ingress unhampered, leading to damage. Overmolded connector If cable jacket is breached... ...the compound will block the liquid and prevent ingress.

Connector part number (Products without color coding) : Sealed in Unmated Condition : Preferred part numbers with shorter leadtimes

JMX Series | Connector JMX1-02 (2 x Ø 1.3 mm / 2 x Ø 0.051") Dimensions (For mated connector lengths see page 21) Maxi panel thickness: 8 mm / 0.31" Maxi panel thickness: 6 mm / 0.24" Straight plug IP68 (FH) & IP50 (FD) Connector Connector color coding Part number (1) Coding Front mount Rear mount Front mount Rear mount "**": Gender / Termin