AdVantage 2.0 BenchTop Freeze Dryer - 2 Pages

Add to MyMedicalExpo favorites
AdVantage 2.0 BenchTop Freeze Dryer

Catalog excerpts

Benchtop Freeze Dryer Performance Specifications Item Maximum Ice Condensing Capacity † in 24 hours (L) Maximum Deposition † Rate (L/hour) Shelf Pull-Down from 20 °C to -40 °C § (minutes) Compressor Horsepower System Refrigerant Vacuum Rate of Rise (mT/hour) Maximum Condenser Capacity (L) Lowest Condenser Temperature (50 Hz / 60 Hz, °C) Lowest Shelf Temperature (50 Hz / 60 Hz, °C) Volume-Based Leak Rate (mbar·L/sec) Shelf Temperature ‡ Control Range (°C) Note: Performance specifications are based on SP Scientific test data from units operating at an ambient room temperature of approximately 20 °C. SP Scientific recommends an operating range of 15-25 °C (59-77 °F). Offers the capabilities of a pilot-scale freeze dryer. Includes the easy-to-use, microprocessor-based Wizard 2.0 controller. Available with bulk or removable bottom stainless steel trays. Optional pneumatic stoppering system available for processing in vials. Electrical Requirements Utility Requirements Compressed Air for Stoppering (psig) Approx. Peak Heat Generated (BTU/h) NEMA Receptacle With Vacuum Pump Breaker Amperage* Without Vacuum Pump Approx. Peak Heat Generated (BTU/h)

 Open the catalog to page 1

Standard Configuration Dimensional Data Shelf Configuration Bulk Drying Pneumatic Stoppering Materials of Construction Chamber Construction Shelf Construction 304 Stainless Steel Aluminum Alloy Casting with Corrosion-Resistant Surface Additional Information Nominal Shelf Size (W x D x TH) Vacuum Pump (Required, not included) Chamber Door Full-View Acrylic Condenser Coil Refrigerant Type Quick-Seal Body Condenser Type Quick-Seal Knob Two-Stage Rotary Vane or Suitable Dry Pump Defrost Type Compressed Air Inlet (Stoppering) Stoppering (Optional) 1/4-inch FPT fitting Top-Down Pneumatic (4 in...

 Open the catalog to page 2

All SP SCIENTIFIC catalogs and technical brochures

  1. Multi-Cool

    2 Pages

  2. Freezemobile

    1 Pages

  3. Benchmark

    71 Pages

  4. FlexiCool

    2 Pages

  5. BioCool IV40

    1 Pages

  6. ThermoJet

    2 Pages

  7. AirJet XE

    2 Pages