2201CHD - Heavy Duty 2000 Series, Sled Base, Single Seater 1 Piece Seat and Back Dimensions Seat Height Seat Width Overall Height Based on pattern repeats less than 5 in. x 5 in. 1.75 Options: Wall saving Connected Cal 133 Depth Width Arm Height Frame Construction Constructed of high carbon content cold rolled seam welded flash controlled steel tube free of crimping on all bends, Offered in 1 1/2" 16GA O.D. Tube which is filled with steel shot. All connections are metal to metal. Upholstered material is applied to hi-resiliency molded foam. A reinforced fiberglass armature is encapsulated inside the foam. This assembly provides strength and stability for the molded foam. Seat and back covers are zipper locked and removable in the field. The one piece seat and back are bolted to the frame with four 1/4-20 tamperproof fasteners. Molded foam is formulated displacing 25% of the existing non-renewable petroleum material with a sustainable plant based substitute. The foam performs as regular based cut foam and provides a 3.0 to 3.2 PCF density with no changes to the physical properties, comfort, and longevity of the foam. Flame retardancy Foam provided is compounded to meet specifications of the Federal Motor Vehicle Standard MVSS302 and California Bulletin No. 117 (TB117). Frame feet are finished with non-removable 1 1/8" steel levellers with a 1/4- 20 steel stem. Load Test Exceeds BIFMA Seating Durability Test to 500 lbs [Toll Fee] 1-888-761-7732 [T] 416-246-5550 [F] 416-246-5549 [E] [email protected] [W] www.specfurniture.com Updated Aug 2013