6403M - Huntsville, Medium Back, Three Seats with Outside Arms Dimensions Seat Height Seat Width Overall Height COM Yardage Unit Seat Yardage Back Yardage Based on pattern repeats less than 5 in. x 5 in. 5.25 2.25 3 Options: Wall saving Connected Cal 133 Arm Styles Leg Guard Headrest Standard Yes Yes Rounded Black polyurethane arms Yes No Depth Width Arm Height Frame construction All end and connecting wood frames are assembled from the highest quality European Beech. The wood frame is mechanically fastened to a welded substructure. The substructure uses a combination of 10 and 11 gauge brake-formed sheet metal parts to create the foundation to which suspension, support components and frame subassemblies are attached to form the completed chair frame. The upholstered seat pan is made with 100% recycled plastic with upholstery covers form fitted and stapled over 3 inch thick hi-resiliency polyurethane molded foam. The upholstered back is based on a 3/4 in. thick, 7 ply laminated contoured plywood core platform with velcro-removable upholstery covers form fitted over 4 inch thick hi-resiliency polyurethane molded foam. Molded foam is formulated displacing 25% of the existing non-renewable petroleum material with a sustainable plant based substitute. The foam performs as regular based cut foam and provides a 3.0 to 3.2 PCF density with no changes to the physical properties, comfort, and longevity of the foam. Flame retardancy Foam provided is compounded to meet specifications of the Federal Motor Vehicle Standard MVSS302 and California Bulletin No. 117 (TB117). An optional molded self-skinned urethane arm cap is available. The arm cap is molded over a 1/8 in. thick steel flat plate which is attached to the seat frame using mechanical connections. Frame feet are finished with durable injection molded plastic glides. Load Test Exceeds BIFMA Seating Durability Test to 1000 lbs [Toll Fee] 1-888-761-7732 [T] 416-246-5550 [F] 416-246-5549 [E] [email protected] [W] www.specfurniture.com Updated Jan 2013