Hopitality Carts Case Construction Constructed of 3/4" NAUF (no added urea-formaldehyde) particle board (Phase 2 CARB compliant) core. Board is covered in either plastic laminate (plastic laminate one both sides) or laid up flat cut veneer on both sides. The core is manufactured with 100% recycled material and is manufactured inside a FSC Certified manufacturing facility. Laid up board is then cut to fit outside dimensions of cabinet then cam and pin joined to form the cabinet. The doors are finished with high quality 120 degree hinges and are opened and closed using touch latch mechanisms. Laminate Shelves and Constructed of 3/4" NAUF (no added urea-formaldehyde) particle board (Phase 2 CARB compliant) Doors core, covered and bonded with a water-based glue to a 1/16" high-pressure plastic laminate sheet on both sides for a sandwich top thickness of 1 1/8". The core is manufactured with 100% recycled material and is manufactured inside a FSC Certified manufacturing facility. Veneer Shelves and Veneer tables are offered constructed of 3/4" NAUF (no added urea-formaldehyde) particle board Doors (Phase 2 CARB compliant) core, covered and bonded with a water-based glue to a 1/32" hand laid up flat cut veneer on top and bottom for a sandwich top thickness of 1 1/16". Veneers are selected with careful attention to grain matching and symmetry. Casters Swivel casters with brake are twin-wheel and made of a durable polyamide center, polyurethane thread for reduced noise, and precision ball bearings secured with a steel plated stem. [Toll Free] 1-888-761-7732 [T] 416-246-5550 [F] 416-246-5549 [E] [email protected] [W] www.specfurniture.com