EVA
1 / 7Pages

Catalog excerpts

EVA - 1

3/6/12kW EVAP POWER SUPPLY SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION Specially Designed for E Beam Coating Applications • 3kW, 6kW and 12kW Power Levels Remote Analog and Ethernet/RS-232 Interface Arc and Short Circuit Protected, Fast Arc Recovery User Configurable Dynamic Arc Intervention • Optional Filament Gun Supply (up to 3 channels) OEM Customization Available www.spellmanhv.com/manuals/EVA Spellman’s new EVA Series is specifically designed for demanding electron beam coating applications. A full featured front panel provides local control, while an extensive analog interface allows remote capability. The included Ethernet and RS-232 digital interfaces simplify integrating the EVA into your system design. The EVA’s robust IGBT inverter design is inherently fault tolerant. The proprietary low capacitance, low stored energy high voltage output section is ideal for dynamic load and fault conditions encountered in coating applications. Fast arc recovery times (<2ms) minimize process interruptions. Many operational parameters can be configured by the user to suit their particular requirements via the provided graphical user interface (GUI). An optional filament gun supply is available. The EVA can support one, two or three filament gun supply channels providing unprecedented flexibility and cost effectiveness. (3U) Chassis HARDWARE BASED OPTIONS 3PH 180-264Vac Three Phase Input 1PH 180-264Vac Single Phase Input (3kW & 6kW only) 400VAC 360-528Vac, Three Phase Input (6kW & 12kW only) LL(X) High Voltage Cable Length HV2 Two High Voltage Output Connectors HV3 Three High Voltage Output Connectors FIL1 Filament Gun Supply—One Channel FIL2 Filament Gun Supply—Two Channels FIL3 Filament Gun Supply—Three Channels SOFTWARE CONFIGURABLE FEATURES Adjustable Overload Trip Arc Trip Count Arc Quench Time Arc Reramp Time Arc Window Time 3/6/12KW HV SPECIFICATIONS Input Voltage: (must be specified at time of order) Option 3PH: 180-264Vac, 50/60Hz, three phase, 90% efficiency, 0.85 power factor Option 1PH: 180-264Vac 50/60Hz, single phase, 90% efficiency, 0.65 power factor (3kW & 6kW only) Option 400VAC: 360-528Vac 50/60Hz, three phase, 90% efficiency, 0.85 power f actor (6kW & 12kW only) Input Current: Option 3PH: 180-264Vac, 50/60Hz, three phase 3kW—13 amps, maximum 6kW—25 amps, maximum 12kW—50 amps, maximum Option 1PH: 180-264Vac, 50/60Hz, single phase 3kW—29 amps, maximum 6kW—57 amps, maximum Option 400VAC: 360-528Vac, 50/60 Hz, three phase, 6kW—13 amps, maximum 12kW—25 amps, maximum Output Voltage: 5kV @ 600mA, negative polarity. 3kW maximum. 10kV @ 600mA, negative polarity. 6kW maximum. 10kV @ 1200mA, negative polarity. 12kW maximum. Local Output Controls: Voltage is continuously adjustable over entire range via a 10 turn potentiometer. Voltage Regulation: Load: 0.05% of full voltage +500mV for full load change. Line: 0.05%of full voltage +500mV over specified input range. Ripple: <3% Vrms Stability: 0.02%hr. after 1 hour warm-up. Temperature Coefficient: 100ppm/°C. Environmental: Temperature Range: Operating: 0°C to 40°C Storage: -40°C to 85°C Humidity: 10% to 90% RH, non-condensing. Cooling: Forced air; inlet through side panels, outlet at rear panel Metering: Front panel digital voltage and current meters, 3.5 digit, accurate to within 1%. I High Voltage Electronics Corporation Corporate Headquarters Hauppauge, New York USA -631 -630-3000 FAX: +1 -631 -435-1620 e-mail: sales@spellmanhv.com www.spellmanhv.com Spellman High Voltage is an ISO 9001 and ISO 14001 Copyright © 2014 Spellman High Voltage Electronics Corp.

Open the catalog to page 1
EVA - 2

3/6/12kW EVAP POWER SUPPLY SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION 3/6/12KW HV SPECIFICATIONS System Status Display: “Dead Front” type indicators provide status of up to 12 system parameters including voltage regulation, fault conditions and circuit control. Input Power Connector: A 6 foot (1.8 meter) long captive line cord will be provided. Analog Interface Connector: 50 pin female D connector High Voltage Output Cable: 10 ft (3.05m) shielded high voltage cable, removable at rear panel. Dimensions: 3kW/6kW Units: 5.25”(3U)H x 19” W x 21” D (133mm x 482mm x 533mm) 12kW Units:...

Open the catalog to page 2
EVA - 3

3/6/12kW EVAP POWER SUPPLY SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION PAGE 3 OF 7 BEAM CONTROLLER SPECIFICATIONS TYPICAL EVA OPERATING SETUP Analog Interface Connector: Male 25 pin D connector Filament Output Connections: (gun drive cable) The secondary leads of the filament power transformer exiting the gun output box are 36” (91.44cm) long. The cover of this box is interlocked for safety purposes. Environmental: Temperature Range: Operating: 0˚C to 40˚C Storage: -40˚C to 85˚C Humidity: 10% to 90% RH, non-condensing. Cooling: Forced air; inlet through side panels, outlet at rear panel....

Open the catalog to page 3
EVA - 4

HV POWER SUPPLY INTERFACE-50 PIN FEMALE D CONNECTOR BEAM CONTROLLER INTERFACE— 25 PIN FEMALE D CONNECTOR Spellman m High Voltage Electronics Corporation Corporate Headquarters Hauppauge, New York USA +1 -631 -630-3000 FAX: +1 -631 -435-1620 e-mail: sales@spellmanhv.com www.spellmanhv.com Spellman High Voltage is an ISO 9001 and ISO 14001 Copyright © 2014 Spellman High Voltage Electronics Corp.

Open the catalog to page 4
EVA - 5

3/6/12kW EVAP POWER SUPPLY SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION DIMENSIONS: in.[mm] 3U 6kW Power Supply FRONT VIEW Spellman I High Voltage Electronics Corporation Corporate Headquarters Hauppauge, New York USA -631 -630-3000 FAX: +1 -631 -435-1620 e-mail: sales@spellmanhv.com www.spellmanhv.com Spellman High Voltage is an ISO 9001 and ISO 14001 Copyright © 2014 Spellman High Voltage Electronics Corp.

Open the catalog to page 5
EVA - 6

3/6/12kW EVAP POWER SUPPLY SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION PAGE 6 OF 7 DIMENSIONS: in.[mm] OVER VOLTAGE CURRENT CONTROL OVER CURRENT POWER CONTROL OVER TEMP INTLK CLOSED SYSTEM FAULT INTLK OPEN RGLT ERROR EVA High Voltage Power Supply BACK VIEW REMOTE INTERFACE LINE INPUT DANGER HIGH VOLTAGE HIGH VOLTAGE OUTPUT KEEP FAN AND VENT HOLES CLEAR DANGER WARNING Corporate Headquarters Hauppauge, New York USA +1-631-630-3000 FAX: +1-631-435-1620 e-mail: sales@spellmanhv.com Spellman High Voltage is an ISO 9001 and ISO 14001 registered company Copyright © 2014 Spellman High Voltage...

Open the catalog to page 6

All Spellman High Voltage Electronics catalogs and technical brochures

  1. CZE2000

    2 Pages

  2. ECHUCK

    1 Pages

  3. DGM935

    2 Pages

  4. DGM945

    2 Pages

  5. CZE1000R

    2 Pages

  6. MXR

    2 Pages

  7. PDM90PN900

    3 Pages

  8. MONOBLOCK®

    6 Pages