INJECTOR CONTROL ASSEMBLY POWER SUPPLY SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION • Multi-Output E-Gun Supply • Fast Rise Time Pulsed Cathode Current • Remote Programming via Ethernet Spellman’s Injector Control Assembly (ICA) multi-output high voltage power supplies are used to supply the appropriate electrode voltages to a triode electron gun in order to inject electrons into a Linear Accelerator (LINAC). The resulting high-energy electron pulses are used to create high-energy X-Rays for applications such as cargo screening and cancer therapy. This multi-output, rack mount power supply provides the Cathode, Heater and Grid voltages required by the e-gun. The Cathode current can be pulsed up to 500Hz. The Heater and Grid supplies float at the Cathode voltage potential, typically up to -15kV. Injector current is regulated by programming the Grid Pulse Voltage. Remote control and monitoring is via standard Ethernet protocols. LED indicators on the front panel provide basic output and fault status, including Cathode Current and Arc faults. The ICA series can be customized for specific system requirements. TYPICAL APPLICATIONS Cargo screening, cancer therapy SPECIFICATIONS Input Voltage: Output Voltage: Pulsed Cathode Current: Mean Cathode Current: Current Pulse Width: Current Pulse Frequency: Current Risetime: Output Voltage: Grid (fixed): Pulse Voltage: Injector current is regulated by programming the Grid Pulse Voltage Front Panel: Interlock (24V nominal, 9 pin D-sub male pin plug) Rear Panel: AC Power In (IEC320 C14 male pin receptacle) 24V must be present to enable output high voltage cathode. It is intended to connect to the system to disable the ICA in case any system interlocks have not been satisfied. Operating Temperature: Storage Temperature: 30% to 60% relative humidity, non-condensing Regulatory Approvals: The ICA is designed to meet 60601-1, and is RoHS compliant. FRONT PANEL LED INDICATORS Spellman High Voltage is an ISO 9001 and ISO 14001 Copyright © 2015 Spellman High Voltage Electronics Corp. I High Voltage Electronics Corporation Corporate Headquarters Hauppauge, New York USA -631 -630-3000 FAX: +1 -631 -435-1620 e-mail: [email protected]

INJECTOR CONTROL ASSEMBLY POWER SUPPLY SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION DIMENSIONS: in.[mm] FRONT VIEW Spellmanf I High Voltage Electronics Corporation Corporate Headquarters Hauppauge, New York USA +1 -631 -630-3000 FAX: +1 -631 -435-1620 e-mail: [email protected] www.spellmanhv.com Spellman High Voltage is an ISO 9001 and ISO 14001 Copyright © 2015 Spellman High Voltage Electronics Corp.