Spellman’s XRB160PN480/2 Monoblock® X-Ray source is designed for OEM applications powering its internal X-Ray tube up to 160kV at 480W. Features like universal input, small package size and a standard analog and RS-232 digital interface simplify integrating this Monoblock® into your X-Ray system. Standard models are available with fan shaped beam geometry. Proprietary emission control circuitry provides excellent regulation of X-Ray tube current, along with outstanding stability performance. TYPICAL APPLICATIONS X-Ray Scanning: Food Inspection, Fill Level Confirmation and Security Applications SPECIFICATIONS X-Ray Characteristics: Tube Type: Glass tube, Tungsten target, Be filter Beam Filter: 1mm curved window Beam Geometry: Asymmetrical fan 80° x 10° ±2° Input Voltage: 100-240Vac ±10%, 50/60Hz, 6.5A max; 12Vdc @ 5A X-Ray Tube Voltage: Nominal X-Ray tube voltage is adjustable between 80kV to 160kV X-Ray Tube Current: 0.25mA to 3mA over specified tube voltage range X-Ray Tube Power: 480W maximum Voltage Regulation: Line: ±0.1% for a ±10% input line change of nominal input line voltage Load: ±0.1% for a 0.3mA to 3mA load change Voltage Accuracy: Voltage measured across the X-Ray tube is within ±1% of the programmed value Voltage Risetime: Ramp time shall be <1 second from 10% to 90% of rated output • Integrated HV Supply, Filament Supply, X-Ray Tube, Beam Port and Control Electronics • Compact & LIghtweight Universal Input, Power Factor Corrected • Can be Mounted in Any Physical Orientation • Analog Control Interface and Standard RS-232 Digital Interface Voltage Overshoot: Within 5% of rated voltage in <10ms Voltage Ripple: 0.1% pp of rated voltage @ <1kHz Current Regulation: Line: ±0.1% for a ±10% input line change of nominal input line voltage Load: ±0.5% @ 80-160kV, 0.3mA to 3mA Current Accuracy: Current measured through the X-Ray tube is within ±1% of the programmed value Current Risetime: <1 second from 10% to 90% of rated output Arc Intervention: 4 arcs in 10 seconds with a 200ms quench = Shutdown Filament Configuration: Internal high frequency AC filament drive with closed loop filament emission control Analog Interface: 0 to 10Vdc ground referenced signals Digital Interface: RS-232 interface. Control Software: A demo GUI for engineering evaluations will be provided for the RS-232 digital interface upon request. Interlock Signals: A hardware interlock functions in both analog and digital programming modes. Operating Temperature: 0°C to +40°C Storage Temperature: -40°C to +70°C Humidity: 95% relative humidity, non-condensing Cooling: Heat exchanger w/fan and oil pump, powered from DC input m High Voltage Electronics Corporation Corporate Headquarters Hauppauge, New York USA +1 -631 -630-3000 FAX: +1 -631 -435-1620e-mail: [email protected] www.spellmanhv.com Spellman High Voltage is an ISO 9001 and ISO 14001 Copyright © 2010 Spellman High Voltage Electronics Corp.

Spellman I High Voltage Electronics Corporation Corporate Headquarters Hauppauge, New York USA +1 -631 -630-3000 FAX: +1 -631 -435-1620 e-mail: [email protected] www.spellmanhv.com Spellman High Voltage is an ISO 9001 and ISO 14001 Copyright © 2010 Spellman High Voltage Electronics Corp.

DIMENSIONS: in.[mm] FRONT VIEW BACK VIEW SIDE VIEW Spellman I High Voltage Electronics Corporation Corporate Headquarters Hauppauge, New York USA +1 -631 -630-3000 FAX: +1 -631 -435-1620 e-mail: [email protected] Spellman High Voltage is an ISO 9001 and ISO 14001 registered company Copyright © 2010 Spellman High Voltage Electronics Corp.