Medical Device Regulation COMPLIANCE STAIR CHAIR FEATURES ■ Frame in aluminum makes the chair lightweight and resistant at the same time ■ Two telescopic handles at the front and two foldable ones behind the backrest help lifting and transport operations ■ Rear wheels' locking mechanism makes sure the chair does not slide on a flat surface I Semirigid seat and soft backrest are built to increase patient comfort I Foldable footrest increases patient stability I Easy to clean PVC seat and backrest are resistant to chemicals ■ Pivoting front wheels makes the chair more maneuverable. Available models 4BELL SILVER+ Frame color Seat color Code ST10500 4BELL SILVER+ is a stair chair designed to transfer or evacuate patients with mobility limitations from multi-storey buildings. The chair is FDA compliant and built in accordance to the specifications set by EN 1865-1. If the stair chair is installed on the 4Bell Max+ bracket, it will comply with 10G crash test according EN 1789 standard. The frame of the chair is made in aluminum for increased resistance. Its total weight is 9,4 kg (20.7 lb). Load Capacity CLASS I MEDICAL DEVICE COMPLIANT WITH UE REGULATION 2017/745 | | EN 1789 | | EN 1865-1 Chair Store

Product datasheet 4BELL SILVER+ – Code ST10500 – CND Classification V9099 TECHNICAL DATA Length with handles retracted Length with handles extracted Dimensions when folded Load capacity Front wheels Rear wheels Restraint belts.

ST10453 4BELL+ MAX 10G tested Fastening system • It is installed in ambulances, special vehicles or airplanes • It helps securing the 4Bell Silver+ in foldable position to either the wall or the floor • When 4Bell Silver+ is installed on the 4Bell Max+ bracket, it will comply with 10G crash test according EN 1789 standard. Rear auxiliary handles Rev.0 (14/03/2022) ©Copyright - This document is property of SPENCER ITALIA S.r.l and can’t be reproduced, used and disclosed without the written approval of SPENCER ITALIA SRL. Spencer Italia s.r.l. a socio unico soggetta a direzione e coordinamento...