INJECT S Infusion pump The Inject S is your right choice for cost effective intravenous,intra-arterial, epidural, or subcutaneous infusion of medications. The device is characterized by: Intuitive and user friendly operation - Simple entry of parameters via numeric keypad - Automatic and manual bolus modes - Set-up menu enables customization of the pump - Anti-bolus and anti-siphon functions increase patient safety - Titration allows to change the infusion parameters without interruption of infusion - All major brand syringes from 1 ml to 100 ml are accepted - The drug library contains 15 drug names and can be updated by physicians Flow rate range Volume infused Volume to be infused (VTBI) Programmable infusion time Keep Open Rate (KOR) rate KOR volume Stand by time Volume infused Volumetric accuracy with approved syringes Compatible syringes, ml Occlusion alarm pressure Event log Bolus rate Bolus volume limit Purge volume Maximum volume under single fault condition Alarms (messages) Selectable options operations Protection Operation conditions Storage conditions Power supply Power consumption Battery type Battery life Battery charging time Weight Dimensions Standards Optional Technical data 0.1 - 99.9 ml/h in 0.1 ml/h steps 100 -1500 ml/h in 1 ml/h steps 0.1 – 9999 ml 0.1 - 99.9 ml in 0.1 ml steps 100 to 999 ml in 1 ml steps or unlimited volume 1s – 99h 59min 59 sec 0.1 ml/h -10 ml/h in 0.1 ml/h steps 1% of the syringe volume 1 - 999 min in 1 min steps 0.1 to 9999 ml ± 2% (according to EN 60601-2-24) 5 – 100 ml of all major brands including additional brands (upon agreement) Low - 40±15kPa, medium 80±25kPa, high 120±35kPa Not less than 2000 events 10 -1500 ml/h in 1 ml/h steps 0.1 – 99.9 ml in 0.1 ml steps No limit <0,5 ml Very Low Battery – Error XX – Syringe plunger not fitted – Clamp open – Occlusion – occlusion or End – Syringe empty – End of infusion. STOP – End of profile. STOP – Syringe empty. KOR – End of infusion. KOR – Low battery with battery led flashing – X min pre alarm – 2 min inactive. Enabled via set-up menu: VTBI --- Volume over time --- Infusion rate limit: xxxx ml/h --- Automatic/manual bolus --- Bolus rate programming --- Bolus rate limit: xxxx ml/h --- Total volume display --- Autosave --- Drug name display --- Titration --- Standby --- Keypad lock --Quiet mode --- KOR function --- KOR rate XX ml/h --- Date and time display Selectable infusion modes: Continuous rate --- easy pump --- Profile --- TIVA Class II, CF, IP42 +5 to +40 °C -20 to +40 °C (220 -230) VAC ± 10%, 50/60 Hz, or internal rechargeable battery 10 VA (max) Built-in NiMH 9.6 V 1800 mAh 14 h @ 5 ml/h Up to 24 hours 2.6 kg 135x305x195 cm EN 60601-(1, 1-2, 1-6, 1-8, 2-24) 10g Wall Bracket (SV04034D) SV04033C – Inject S syringe pump Distributed by Spencer Italia S.r.l. Rev.2 (15/01/2018) UNCHECKED COPY – further revisions will be available on http://support.spencer.it Spencer Italia S.r.l. a socio unico Sala Baganza (PR) Italia Tel. +39.0521.541111 Fax +39.0521.541222 spencer.it © Copyright - This document is property of SPENCER ITALIA S.r.l and can’t be reproduced, used and disclosed without