1. Catalogs
  2. Spire Integrated Solutions
  3. Model DEM Dyna-Poise™
video corpo

Model DEM Dyna-Poise™

Model DEM Dyna-Poise™

Model DEM Dyna-Poise™

Product catalog summary
Overview: The CSI/JEWETT DEM Dyna-Poise™ Rotating Table Top Autopsy Table is designed for autopsy procedures with features that enhance teaching, demonstrations, and special procedures like decomposition. It includes a rotating table top, down-draft ventilation, and electro-mechanical height adjustment.
Design Features:
  • Rotating Table Top: Manually rotates 180 degrees in either direction with a swivel lock.
  • Height Adjustment: Adjusts from 32 to 38 inches (81.2 to 96.5 cm) using push-button controls.
  • Drainage System: Center table drain with pre-strainer cover and secondary stand-pipe, basket-type strainer.
  • Integral Sink: Full-width sink with overflow drain and deck-mounted plumbing, measuring 14 inches long by 10 inches deep (35.6 x 25.4 cm).
  • Faucet: Wrist-operated, chrome-plated brass faucet with hot and cold water flow control and swivel goose neck spout.
  • Hydro-Aspirator: "Reverse-flow" system with built-in vacuum breaker, 10 feet (3.05 meters) of PVC hose, and anti-aerosol waste outlet.
  • Ventilation: Double-cone style down-draft ventilation system.
  • Construction: Welded sanitary Type 304 stainless steel with large radius inside corners for easy cleanup, and a 3/4 inch radius rolled edge for strength.
  • Body Supports: Two 14-gauge, 6-inch (15.2 cm) wide, solid stainless steel sliding body supports.
  • Headrest: Adjustable, six-position PVC headrest.
  • Dimensions: Length of 90 inches (228.6 cm) and width of 30.25 inches (76.8 cm).
Available Options:
  • Removable perimeter flushing system (SR1092).
  • Extra-wide stainless steel body supports in various widths (6, 12 & 18 inches / 152, 305 & 455.7 cm), available in solid or perforated surfaces.
  • Graduated table edge in centimeters or inches (SR1079).
  • Bracket for hanging an organ scale.
  • Factory-installed waste disposer with automatic water swirl in sink, available with 1/2 or 3/4 hp motor.
  • Emergency eye wash.
  • Air, gas, and vacuum valves (SR2147-02).
  • Duplex waterproof electrical GFCI outlet (SR1081).
  • Spray hose assembly (SR1966).
  • Stainless steel instrument tray (SR999).
  • Thermo-plastic cutting board (SR965).
Contact Information: CSI/JEWETT, 6910 West Ridge Road, Fairview PA 16415, Phone: 814-474-9353, Fax: 814-474-5797, Website: www.csi-jewett.com
See more

Catalog excerpts

Model DEM Dyna-Poise™-1

CSI/JEWETT 6910 West Ridge Road, Fairview PA 16415 Phone: 814-474-9353 Fax: 814-474-5797 www.csi-jewett.com The CSI/JEWETT DEM Dyna-Poise Autopsy Table is used for the autopsy procedure while organ dissection is done on an adjacent dissecting sink. The down-draft ventilation, rotating table top and electro-mechanical height adjustment make this table ideal for teaching and demonstrations, confined rooms, varying work heights and for special autopsy procedures such as decomposition. Design Features Include • Top rotates manually 180 degrees in either direction and features a convenient swivel lock • Adjusts six inches from 32 to 38 inches (81.2 to 96.5 cm) with easy pushbutton height controls • Center table drain with pre-strainer cover and a secondary stand-pipe, basket-type strainer • Exclusive full-width, integral sink (14 inches long by 10 inches deep (35.6 x 25.4 cm) with overflow drain and deck-mounted plumbing features • Wrist-operated, chrome-plated brass faucet, with hot and cold water flow control valves and swivel goose neck spout • "Reverse-flow" hydro-aspirator with built-in vacuum breaker includes hot and cold water flow control, 10 feet (3.05 meters) of PVC hose, hose storage rack and anti-aerosol waste outlet • Double-cone style down-draft ventilation system • 3/4 inch radius rolled edge provides superior strength to table top and inhibits the collection of fluid or debris on the underside of the table • Welded sanitary Type 304 stainless steel construction with large radius inside corners for easy cleanup

 Open the catalog to page 1
Model DEM Dyna-Poise™-2

• Manufactured without crevices, lapped edges, rivets, bolts or other fastening devices so that work surfaces remain smooth and prevent accumulation of bacteria • Two 14-gauge, 6-inch (15.2 cm) wide, solid stainless steel sliding body supports • Adjustable, six-position PVC headrest • Length-90 inches (228.6 cm); width-30.25 inches (76.8 cm) Available Options • Removable perimeter flushing system (SR1092) • Extra-wide stainless steel body supports (6, 12 & 18-inches wide /152, 305 & 455.7 cm): solid (SR2711S) or perforated (SR2711) surface • Graduated table edge in centimeters or inches (SR1079) •...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.