Surgical Scrub Sinks
1 / 2Pages

Catalog excerpts

Surgical Scrub Sinks - 1

Surgical Scrub Sinks Ensuring the right equipment for your SPD procedures CSI Jewett Surgical Scrub Sinks offer stainless steel construction, advanced hands free controls and low maintenance. The systems are engineered for high volume, providing sanitary and reliable use. The control system activates water flow through a continuous infrared beam emitted from a strategically located sensor in the front edge of the shelf. Activation occurs when the operator is in a user’s position (12" - 46") from sensor for a period of 2 seconds. A power switch behind the sink disengages all electrical power to allow for cleaning and servicing. Spire at your side A thermostatically controlled mixing valve provides selection of water temperature up to 115° F (46° C). Water flow stops automatically if temperature surges past this preset limit. The mixing valve is located away from the top surface to reduce the possibility of bacteria growth and errant settings of temperature. The thermostatic controlled mixing valve includes static sensing probe, hot and cold water controls, and internal strainers. General Specifications • Stainless steel construction • Advanced hands free controls • Thermostatically controlled mixing valve provides selection of water temperatures up to 115° F (46° C) • Plumbing hardware of brass and copper or chrome plated where exposed • Sink basin designed to reduce splashing • Electronic components UL Listed and pre-wired Thermastatic Water Control Valve A Chalmers Group Company Swivel Aerated Nozzle Your Healthcare and Life

Open the catalog to page 1
Surgical Scrub Sinks - 2

MODEL SPECIFICATIONS Construction All plumbing hardware is brass and copper, or chrome plated where exposed. The sink basin is fabricated from 16 gauge type 304 polished stainless steel, with all other exposed surfaces of 18 gauge polished stainless steel. Exposed welds are ground and polished to blend with adjacent surfaces. With coved corners and radius edges, the sink basin is designed to reduce splashing and flush away waste. The sink bottom is sloped to a large 2" drain (2 drains are provided on the SSS3C). Coved corners reduce splashing The unit is designed with anti-splash end panels...

Open the catalog to page 2

All Spire Integrated Solutions catalogs and technical brochures

  1. CWC Series

    4 Pages

  2. Tesalys

    8 Pages

  3. Model DPEM

    2 Pages

  4. MC2-B-MT1

    2 Pages

  5. Model DPV

    2 Pages

  6. R1910-31L/R

    2 Pages

  7. SR1910-30

    2 Pages

  8. 6R2W SPECS

    2 Pages

  9. 4R2W Specs

    2 Pages

  10. 1R SUBMITTAL

    1 Pages