Backstroke Start System & Trainer
2Pages

{{requestButtons}}

Catalog excerpts

Backstroke Start System & Trainer - 1

starting platforms Backstroke Start System & Trainer Designed to help make backstroke starts faster and reduce the chance for slipping, the Backstroke Start System provides the option to easily add this capability to virtually any pool deck or starting platform configuration. Backstroke Start System • Anti-slip backstroke ledge with raised diamond pattern • Easily adjustable ledge height with one-handed operation from in Backstroke Start System PART # BSS1000 • Durable HDPE frame to protect from harsh elements at either indoor or outdoor locations FINA FR 2.10 Backstroke Ledge Requirements • The ledge may be adjustable to 4cm above or 4cm below the water level • The ledge is a minimum of 65cm in length • Three unique mounting options to secure device to most deck and block configurations • Clear markings on spool to show height of ledge to water level for compliance • FINA 2.10 compliant for competition • The ledge must be 8cm in height, 2cm at the width with 10 degrees of slope 3 MOUNTING OPTIONS In-Deck Anchoring Kit Pool Wall Mounting Kit with Strap Platform Post Mounting Kit Plastic anchor with grounding bolt, fastened with plastic-headed stainless steel thumb screws Vinyl-coated ¼” thick stainless steel bracket with 10 foot long polyester strap and stainless steel cam buckle Vinyl-coated ¼” thick stainless steel plate and two brackets shaped to lock onto 2 inch square single post frames Backstroke Start Training Device • • Two 5-foot polyester straps with stainless steel cam buckle to secure and adjust height Anti-slip backstroke ledge with raised diamond pattern Works with a wide va

Open the catalog to page 1
Backstroke Start System & Trainer - 2

BACKSTROKE START SYSTEM BASE UNIT DECK-TO-WATER HEIGHT (PROVIDED BY CUSTOMER) Product Name: Backstroke Start Training Device Part Number: 03-650T All dimensions shown are in [mm] and inches 0 DECK-TO-WATER HEIGHT (PROVIDED BY CUSTOMER) Product Name: Backstroke Start Training Device Part Number: 03-650T All dimensions shown are in [mm] and inches DECK-TO-WATER HEIGHT (PROVIDED BY CUSTOMER) BACKSTROKE START TRAINING DEVICE Shipping (Class 300) Model No. Backstroke Start Training Device Backstroke Start System Pool Wall Mounting Kit w/ Strap Platform Post Mounting Kit S.R.Smith, LLC...

Open the catalog to page 2

All SR SMITH catalogs and technical brochures

  1. Cantilever

    1 Pages

  2. Vista

    1 Pages

  3. Standard

    1 Pages

  4. O-Series

    1 Pages

  5. Low Profile

    1 Pages

  6. ML300

    1 Pages

  7. multiLift™

    2 Pages

  8. PAL® Series

    1 Pages

  9. SR SMITH

    15 Pages

  10. PAL2

    1 Pages