MAGIC-ACCESS™LOW ENERGY SWING DOOR OPERATORMedium-to-Low Duty Swing Door Operator with Light Manual Opening Force The STANLEY Magic-Access Low Energy Operator is designed to provide a cost effective, custom solution for automating swing doors. This medium-to-low duty swing door operator can automate new or existing swing door panels up to 125 pounds through the use of a push plate, wave sensor, card reader, or other knowing-act device. The header width is customized to span the full width of the door opening, adding to a finished, aesthetically pleasing look. The end result is a professionally installed automatic door system that is quiet, smooth, and safe. • Powers door panels up to 42” (1067 mm) wide and 125lbs (57 kg) • Microprocessor-based controller will stop immediately at any point of the doors swing cycle when an obstacle is detected. • Acts as a mechanical closer for manual operation in the event power is shut off • Built-in Lock Delay to work with Strike • Built-in Power Close to compensate for wind and stack pressure • Adjustable closing time delay • Lighter manual opening force as compared to the force required on a manual swing door • UL listed for service in the U.S and Canada, complies with ANSI/BHMA A156.19 and meets the applicable provisions of ANSI 117.1

MAGIC-ACCESS™LOW ENERGY SWING DOOR OPERATOR SPECIFICATIONS OPTIONAL FEATURES Description • Custom finishes • Magic Touch Activation for power open when opened manually past 3° • Optional modules available for door sequencing • Available as a complete factory engineered door system, including panel MOUNTING OPTIONS ■ Surface mount Out Swing * All Specifications are subject to change. Please contact your local sales representative to ensure accuracy. ACTIVATION ELEVATION VIEWS © 2022 Stanley Access Technologies, LLC. SAT-0150 12/22