STANLEY Rush Product Catalog
76Pages

One never gets a second chance to make a first impression

Quality Cladding Custom extruded aluminum members with “wraparound” metal will withstand the rigors of use and the elements for long life and durability. Rushclad products are as enduring but lighter weight and more cost effec ve than solid stainless steel construc on. Mechanically fastened cores of aluminum offer increased strength by cladding with stainless steel, bronze or other exo c metal to create an entrance of las ng beauty. Custom aluminum extrusion a minimum of 1/8” with “wings” to catch and hold cladding Two part polysulphide separator/ adhesive prevents delamina on and water...

Setback bu joints to minimize joint profile Silicone glazing Concealed collapsing mechanism Mechanically fastened extrusions for strength 1/8” aluminum, stainless steel or muntz cladding Narrow profile 12ga galvanized core and supports on canopy 1/16” roof sheets to match door Con nuous silicone seal to prevent water infiltra on and noise t

Revolving Doors Security Revolving Doors Balanced Doors Swing Doors Stanley Spec Centre

Revolving Doors

Revolving Doors Always Open. Always Closed. Air infiltra on through revolving doors is 1/10th of that through a swing or sliding door and maintains the HVAC integrity of the building in both hot and cold climate. Allow op mum traffic processing – 2880 persons in and 2880 persons out per hour while reducing airborne dust, dirt and noise. Stanley Rush’s qualified team will assist the designer in capturing the aesthe c of design within the parameters of budget and schedule. All glass, metal framed, economy or pres gious, the limits are yours. Custom op ons allow limitless design range. Choose...

These illustrations are intended to give spatial relationship to assists the designer in making the appropriate choice. 6’ Three-Wing Revolving Door 7’ Four-Wing Revolving Door 8’ Three-Wing Revolving Door 10’ Four-Wing Revolving Door

General Informa on – Code compliance Conforms to the Na onal Building Code of Canada. Speed Control Revolving doors must be equipped with a speed regulator to prevent the door from rota ng faster than the following speeds. Refer to ANSI Standard A156.27 for industry accepted door speeds. Manually Operated Doors • • • • 6’6” inside diameter – 12 RPM 7’0” inside diameter – 11 RPM 8’0” inside diameter – 10 RPM 8’6” inside diameter – 9 RPM Power Assisted or Automa c Revolving Doors • • • • 8’0” inside diameter – 7.2 RPM 9’0” inside diameter – 6.4 RPM 10’0” inside diameter – 5.7 RPM 12’0” inside...

Number of Wings Three-wing revolving door design offers larger segments of passage and is o en considered for hotels and airports where usage requires passage of baggage, carts or wheelchairs. Note: Three-wing models have a smaller entry and exit opening and therefore 2 units are recommended for in/out flows. Four-wing revolving door design allows for a more controlled flow of traffic. This design has the added benefit of a superior weather seal and less air infiltra on in the closed posi on (quarter-point closing). Revolving Door Configura on Every revolving door has basic components regardless of...

Upper Concealed Collapsing Mechanism Centre Sha Door Wing Canopy (Roof) Curve Enclosure (Drum) Lower Concealed Collapsing Mechanism Floor Mounted Speed Control (Standard)

Fabrica on and Finishes Each means of fabrica on whether aluminum, stainless steel or bronze muntz metal influences the cost, durability and quality of finishes. Anodized Aluminum and Paint Finishes When specifying aluminum, it is advisable to indicate an exterior grade finish to ensure durability in any climate condi ons. If choosing a painted finish, it is important to state the colour code, manufacturer, and UC number of paint. This ensures consistent quotes and assures quality. Mul ple coats, metallics and exo c paint systems drama cally affects pricing. * Note: When assessing aluminum frame...

Stanley Rush Series 1500 Revolving Door NARROW STILE, FULLY FRAMED DOOR DESIGNED FOR LONG LASTING HEAVY USAGE APPLICATIONS • Narrow line flush glazed door and enclosure sections • Concealed collapsing mechanism and speed control • Bookfold wing position factory set for emergency egress • Easily removed door wings to provide fast and efficient service • Tempered glass in door wings • Standard and custom models available STANLEY Rush Products Group All Specifica ons are Subject to Change 65 Riviera Drive Markham, ON, L3R 5J6 (T) 905-944-8005 (F) 905-944-8006 StanleyRush@sbdinc.com...

Stanley Rush Series 1500 Revolving Door 4-Wing Model Custom Dimensions are available in almost any size. ar *Denotes standard size doors in 7’ 0”(2134) height. All other sizes siz and heights are custom fabricated and finished to suit specific job requirements. IMPORTANT NOTICE: 3 –WING models have a smaller opening width and therefore we recommend that 2 units be considered for in/out reco traffic flow. Series 1500 Features and Specifications: D esc ription Diameters Heights Wings Sweeps Locks Finishes Collapsing Canopy Drum glass Wing glass Wing Rails/Stiles Bottom bearings Speed control...

Stanley Rush Series 2500 Revolving Door ELEGANT, SLEEK, AND POLISHED DESIGN COMPLEMENTING MOST BUILDING INTERIORS • All glass flush glazed door and invisible enclosure base sections • Concealed collapsing mechanism and speed control • Conforms to ASTM E283 for air tightness • Available in 3-Wing or 4-Wing design • Standard diameters 6’6” to 9’0” • Optional Rushclad - adhesive applied wrap around design cladding for high quality , long lasting finish STANLEY Rush Products Group All Specifica ons are Subject to Change 65 Riviera Drive Markham, ON, L3R 5J6 (T) 905-944-8005 (F) 905-944-8006...