MATERIAL SAFETY DATA SHEET (MSDS) SterCid Concentrate TM A liquid chemical disinfectant solely for use with the SteriMed Medical Waste Treatment System Responsible for Distribution Producer CID LINES NV/SA Waterpoorstraat, 2 B-8900 leper Belgique-Belgie, Belgium Phone: +32 57 21 78 77 SteriMed Medical Waste Solutions, Inc. 23065 Commerce Dr. Farmington Hills, MI 48335 SteriMed Medical Waste Solutions, Ltd. Moledet, Israel 19130 SteriMed Medical Waste Solutions, Inc. 11611 San Vincente Boulevard, Suite 550 Los Angeles, CA 90049 SteriMed Medical Waste Solutions, Inc. 85 Challenger Road, Suite 501 Ridgefield Park, NJ 07660 Date : Revised, February 15, 2012 National Fire Protection Association (NFPA) Fire Hazard Fire Hazard: 0 Reactivity Hazard: 0 Hazardous if heated, it will give off carbon monoxide. Will not burn. Corrosive material. IDENTIFICATION OF THE PRODUCT AND THE COMPANY Company: Commercial Name: Type of Product: Identification of Product: Use: Responsibility for preparation of this MSDS: Telephone number in case of emergency: See distributor names above SterCid DISINFECTANT: Concentrated antimicrobial solely for use in automatic equipment for medical waste treatment. Liquid. Solely for use with SteriMed S70 fka SteriMed-1and Junior Infectious Medical Waste Treatment Equipment. See SteriMed product operating manuals for detailed information. SteriMed Medical Waste Solutions, Inc. (see above) USA TM SteriMed Medical Waste Solutions, Ltd. Moledet M.P. Gilboa 19130 Israel Infotrac: U.S. & Canada: 1-800-535-5053 International: 1-352-323-3500 SteriMed Medical Waste Solutions, Inc. 23065 Commerce Dr. Farmington Hills, MI 48335 In case of emergency spill please contact Infotrac: U.S. & Canada: 1-800-535-5053 International: 1-352-323-3500 Page 1 of 4

This product is considered to be hazardous and contains hazardous components. Substance Name: CAS nr/EINECS nr/EC index Alkyldimethylbenzylammoniumchloride Isopropanol Didecyldimethylammonium chloride Pine Oil Dye brown (CI solvent brown 42) - Inhalation - Skin contact - Eye contact - Ingestion Environmental precautions: After spillage and/or leakage Corrosive. Harmful by inhalation and if swallowed. May cause sensitization by inhalation and skin contact. Vapors inhalation. Skin and eye contact. Cough. Sore throat. Corrosive to respiratory system Redness, pain. Causes burns. Redness, pain. Blurred...

- Ingestion Industrial Hygiene: 7. PHYSICAL & CHEMICAL PROPERTIES Physical state: Color: Odor: pH value in distilled water: Freezing point: Initial boiling point: Density: Viscosity: Solubility in water: Flash point [°C] Auto-ignition temperature [°C] 8. Liquid. Colorless to Light Brown Aldehyde. ca. 7 (1%) -10°C 105°C ca. 0.984 kg/l N/A Complete. >100°C N/A STABILITY & REACTIVITY Hazardous decomposition products: Hazardous reactions: Hazardous properties: 9. sprayed. When using, do not eat, drink or smoke. Provide local exhaust or general room ventilation to minimize dust and/or vapor concentrations....

IMO-IMDG code: EMS-Nr: UN Packing group: 13. REGULATORY INFORMATION Symbol (s) Corrosive. R 20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R34 - Causes burns. R40 – Limited evidence of a carcinogenic effect. R42/43 – May cause sensitization by inhalation and skin contact. S02 – Keep out of reach of children. S13 – Keep away from food, drink and animal feeding stuffs. S20/21 – When using, do not eat, drink or smoke. S23 – Do not breathe gas/fumes/vapor/spray. S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 – After...