Catalogs >
STERIS >
HARMONY EQUIPMENT MANAGEMENT SYSTEMS

HARMONY EQUIPMENT MANAGEMENT SYSTEMS
8Pages

Catalog excerpts

HARMONY EQUIPMENT MANAGEMENT SYSTEMS - 1

HARMONY™ EQUIPMENT MANAGEMENT SYSTEMS APPLICATION For use in hospital facilities where there is a need for ready access to medical gases, electrical power and audio/visual data services. Harmony Equipment Management Systems (EMS) organize surgical equipment such as endoscopy equipment, laparoscopic equipment, cautery devices, insufflators, etc. Harmony EMS units help hospitals to improve efficiency and safety by ergonomically centralizing all surgical support equipment. DESCRIPTION Harmony EMS systems are mounted to the ceiling, freeing up floor space, removing cord trip hazards and enhancing patient access. Harmony EMS units are custom designed to ensure that each Customer’s medical gas, electrical and audio/visual data service needs are met. Harmony EMS systems enable 360° of equipment access while efficiently organizing all service needs to one centralized location, enhancing staff efficiency. EMS systems are designed to organize surgical equipment with shelving solutions, accessory equipment rails and cable management to cleanly manage all of the Customer’s surgical equipment. EMS units can also support an integrated Plume Evacuation System (PES) that is designed to reduce patient and staff exposure to potentially harmful chemicals and irritants by removing surgical smoke from the sterile field. When not in use, Harmony EMS units can be moved out of the way, allowing for quicker easier room clean-up and turnover. GENERAL CONFIGURATIONS Harmony EMS systems are designed for various weight capacities. Arm suspension choices include light, medium and strong systems that offer a range of equipment load capacity up to 595 lb (270 kg). These units come in both fixed-height and height-adjustable models. Harmony EMS arm suspension options offer single arm or double arm configurations to enable maximum head to foot or shoulder to shoulder patient coverage. (Typical only - some details may vary.) CUSTOM BUILT Each Harmony EMS system is custom configured to ensure that each Customer’s needs are addressed. Units are designed to provide: medical gas, electrical, low voltage audio/visual data services, while also managing surgical support equipment. Service quantity, type and location on the unit are designated during the custom configuration process. A trained STERIS representative can assist you by custom configuring a system using 3D virtual software to meet all of your equipment management needs. Please contact STERIS for further information, 800-548-4873. EMS service unit options: Arm systems, supply heads and supply columns are available in a large number of combinations. Please refer to the Harmony Equipment Management Systems configuration matrix (page 6) for a complete listing of system configurations. A trained STERIS representative can also assist you by custom configuring a system using 3D virtual software to meet all of your equipment management needs. Please contact STERIS for further information, 800-548-4873. Single arms are available in the following lengths: • 20" (500 mm) and 40" (1000 mm) Double arms are available in the following total lengths: • 40" (1000 mm), • 50" (1250 mm), • 60" (1500 mm), • 70" (1750 mm), • 80" (2000 mm), • 90" (2250 mm), and • 100" (2500 mm) Item ________________________ Location(s)___________________ ____________________________ SD827 (12/01/09)

Open the catalog to page 1

HARMONY EQUIPMENT MANAGEMENT SYSTEMS - 2

DESIGN FEATURES Harmony Equipment Management Systems are custom designed with the following components: Supply Columns – Supply columns are offered in several profiles. On standard columns, gas, electric, and data services may be positioned on the following column panels: front left, left side, front right, right side and the back panel. Standard Supply Columns (16-1/2 x 11" [419 x 279 mm]) On Lite columns, gas, electric and data services may be positioned on the following column panels: left side, right side and the back panel. Both the standard and Lite columns are provided with a pair of...

Open the catalog to page 2

HARMONY EQUIPMENT MANAGEMENT SYSTEMS - 3

Single or Double Fixed Plane Arms – Fixed-arm unit lengths range from: 20" (500 mm) to 100" (2500 mm). Arms rotate independently up to 330°. Rotation stops can be adjusted in at least 15° increments at each joint, with some joints accommodating even greater 8° increments. The arms rotate with ease, due to a patented EasyGlide™ Technology. Stop positions are Customer assigned and are easily accessible for future adjustments. Motorized Single or Double Height Adjustable Arms – An electric motor can adjust the height of the supply column or supply head up or down, through a 24" (610 mm) range....

Open the catalog to page 3

HARMONY EQUIPMENT MANAGEMENT SYSTEMS - 4

HARMONY EMS FEATURES UTILITY SERVICES • Distance Tube –- Connects the arm system to the supply head or a column. The length of tube is determined during the custom configuration process, ensuring that the Harmony EMS system is mounted at an ergonomic height relative to the room height and finished ceiling (not adjustable in the field). Medical Gas Latch Connections – Locations are custom configured with the Customer to meet all equipment specification needs. The following gas connection styles are available: • DISS • Latch Index–Quick Disconnect -Chemetron (compatible) • Adjustable...

Open the catalog to page 4

HARMONY EQUIPMENT MANAGEMENT SYSTEMS - 5

CONSTRUCTION NOTES Metal housing is finished in durable, easy-to-clean, powder paint. Unpainted aluminum surfaces are anodized. 1. Reference the appropriate Harmony EMS equipment drawing for important installation requirements and details. MOUNTING ARRANGEMENT 2. Units requiring medical gas services. Gases to be specified by customer. Service connections 1/2" (12 mm) OD copper tube provided above the ceiling plate. All connections shall be in accordance with NFPA 99 and local codes. Harmony Ceiling Systems are mounted to a ceiling plate provided by STERIS. Ceiling plate is attached to a...

Open the catalog to page 5

HARMONY EQUIPMENT MANAGEMENT SYSTEMS - 7

Harmony Equipment Management Systems Configuration Matrix Standard Supply Head (SH) Standard Supply Columns (SC) EasyLift Supply Head Lite Supply Columns (SC L) Standard Supply Column w/Docking Cart STERIS SH20 (500 mm) STERIS SC30 (750 mm) STERIS SC40 (1000 mm) STERIS SC50 (1250 mm) STERIS SH20 L (500 mm) STERIS SC40 L (1000 mm) STERIS SC50 L (1250 mm) STERIS SC40 K (1000 mm) Max. Load Capacity lb (kg) Max. Load Capacity lb (kg) Max. Load Capacity lb (kg) Max. Load Capacity lb (kg) Max. Load Capacity lb (kg) Max. Load Capacity lb (kg) Max. Load Capacity lb (kg) Max. Load Capacity lb (kg)...

Open the catalog to page 7