Part number: 60058 March 2017 Part number: 60058 March 2017 The ANY-maze USB TTL cable is a low-cost device for interfacing TTL-compatible signals with ANY-maze. The cable has two ports which can be independently configured as TTL inputs or TTL outputs. This cable is ideal for synchronisation between ANY-maze and other equipment such as electrophysiology rigs. • Two ports can be independently configured as inputs or outputs. • Ports can be configured as active high or active low. • Inputs are read at 100Hz. • Outputs can be updated at up to 50Hz. • Cable is 1.8m long. Technical specification USB (USB1.1, USB2.0, USB3.0 compatible) Powered from USB 50mA 2 Independently configurable as TTL input or TTL output Pluggable screw terminal block 100Hz Configurable. Default is Low 200KQ 50Hz 6mA (source or sink) Configurable. Default is Low Connection to PC Connection type Power Maximum current drawn from USB Ports Number of ports Port types Connector Inputs Read frequency Active state Pull-up resistor Outputs Maximum update frequency Maximum current Active state