Biocompatible Clear MED610

Product catalog summary

Overview: MED610 is a transparent, biocompatible PolyJet™ material approved for medical and dental applications. It is suitable for permanent skin contact (over 30 days) and limited mucosal membrane contact (up to 24 hours).

Biocompatibility: MED610 meets several standards for biological risks, including cytotoxicity, irritation, delayed-type hypersensitivity, genotoxicity, and chemical characterization. It is also classified under USP Plastic Class VI.

Mechanical Properties: Key properties include tensile strength (50-65 MPa), elongation at break (10-25%), modulus of elasticity (2,000-3,000 MPa), flexural strength (75-110 MPa), and flexural modulus (2,200-3,200 MPa). The material has a heat deflection temperature (HDT) of 45-50°C and a Shore hardness of 83-86 D.

Sterilization Methods: MED610 can be sterilized using gamma radiation (25-50 kGy) or steam sterilization at 132°C for four minutes with a fractionated pre-vacuum.

System Availability: The material is compatible with various systems, including Objet30 Prime, Objet30 Dental Prime, Objet260 Dental, and others, with a minimum layer thickness capability of 14-16 microns.

Support Removal: Supports can be removed using WaterJet or soluble methods.

Additional Information: The document includes contact details for Stratasys Ltd. and notes that product specifications are subject to change without notice.

Catalog excerpts

Biocompatible Clear MED610 MED610 is a transparent, biocompatible PolyJet™ material medically approved for bodily contact. The material is designed for both medical and dental applications and is approved for permanent skin contact (more than 30 days) and limited mucosal membrane contact (up to 24 hours). MED610 has been evaluated and deemed acceptable for the following biological risks Test Delayed-type hypersensitivity Chemical characterization Standard / Procedure Tensile Strength Flexural Strength Flexural Modulus Izod Notched Impact Water Absorption Shore Hardness Rockwell Hardness Scale Polymerized Density Biocompatibility Data Sheet 1.17 – 1.18 (g/cm3) (0.676 – 0.682 oz/in3) Skin contact – permanent (>30 days) Mucous membrane – short term (up to 24 hrs) Gamma sterilization1 using a dose of 25–50 kGy Sterilization Methods Steam sterilization2 for four (4) minutes at 132 °C (270 °F) with fractionated pr

Open the catalog to page 1

Biocompatible Clear MED610 System Availability Minimum Layer Thickness Capability Support Structure Transparent Transparent Transparent Available Colors Transparent Transparent Transparent Transparent SUP705™ (waterJet removable) SUP706B™ (soluble) GelMatrix™ (waterJet removable) All data provided herein, which is related to consumables, was collected from specific specimens and test conditions and is provided for information only. Characteristics may vary if different specimens and test conditions are applied. Unless expressly provided in writing, no warranties are made and warranties of merchantability...

Open the catalog to page 2

All Stratasys catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list