STRONGARM VertiMax
8Pages

Publication SDVM01REV1 10/26/10 DATA SHEET PRELIMINARY VertiMax™ Adjustable Pendant Arm Vertically adjustable mountings for larger operator interfaces and enclosures Access cover to Cable Passage Heavy-duty Cast-Aluminum Construction Access cover to Cable Passage Choice of Mounting: Post Top, Wall Mount (shown), Machine Top • 13” Vertical Travel • Ergonomic Adjustability • p to 250 pounds of Counterbalanced Lift U • ocks-in-Place Automatically L • .5” Diameter Sealed Cable Passageway 2 Protects Cables, Keeping Them Secure and Twist-Free Easily Repositioned Gasketed Mounting Surface 330˚ STRONGARM’s VertiMax™ Pendant Arm allows the operator to adjust the interface to a comfortable height. The operator simply squeezes the grab handle and the interface becomes weightless and easily repositioned. The gas spring counterbalancing system automatically locks in place, providing safety and stability. Swivels at both ends with rotational stops are standard. 330˚ 13” 13" Vertical Travel Grab Handle 425 Caredean Drive · Horsham, PA 19044 · 215.443.3400 · Fax 215.443.3002 · strongarm.com ©2010 STRONGARM, Inc. 330˚

VertiMax™ Adjustable Pendant Arm Weight/Counterbalance Capacity: Diameter of flexible, sealed cable passage: Vertical Travel: Vertical Adjustment: Mounting Posts: Wall Mount, Post Mount, Machine Top Mount Horizontal, Middle Joint, Vertical Extensions 74" 79" & custom lengths, 6.00" O.D. with blank junction box (affixed to post with 2.5" NPTfemale coupler) £TnKl^ A n JU|® 425Caredean Drive• Horsham,PA 19044• 215.443.3400• Fax215.443.3002 • strongarm.com

VertiMax™ Adjustable Pendant Arm Surface Mounting Selections Wall Mount A Wall Mount VertiMax Arm attaches to a vertical surface with a thru-hole pattern (4) 0.53 ∅. Cables enter through the center of mounting surface or female 2½" NPT access cap opening. Rotational stops at 180° (±90°) are standard; alternate stops can be specified. Post Mount A Post Mount VertiMax Arm attaches to a plain end 6" OD tube or 6" pipe. Collar slides over post and is leveled with set screws. A pilot hole in the collar for drilling through the post and installing a 5/16" bolt is provided. Cables enter through...

VertiMax™ Adjustable Pendant Arm Assembly Configuration Selection Standard Configuration The mounting surface supports the arm and the enclosure is suspended from the arm. This is the most popular configuration. Inverted Configuration The mounting end is inverted, resulting in the arm being suspended from the mounting surface. Inverted post-mounted arms are popular for supporting the arm from the ceiling. Supported Configuration The mounting surface is supporting the arm and the enclosure is supported by the arm. A vertical extension is required for this configuration so that the arm does...

VertiMax™ Adjustable Pendant Arm Arm Extensions Horizontal Extension The horizontal extension increases the overall length of the arm. The horizontal extension is inserted between the mounting surface pivot and the VertiMax arm. Vertical travel does not change. Swivel-to-swivel length is increased by dimension "L". Added Length "L" Arc Radius Added Length "L" Middle Joint Extension The middle joint extension adds a third pivot to the VertiMax arm for in/out adjustability. Length "L" Added Length "L" Arc Radius Optional Stacked Middle Joint Configuration Arc Radius 425 Caredean Drive ·...

VertiMax™ Adjustable Pendant Arm Arm Extensions (continued) Rigid Wall Mount Typically used when there is a mounting surface available but not in the ideal location. The rigid wall mount essentially moves the mounting surface. Both length and angle can be specified. These extensions are preferable over horizontal and middle joint extensions for applications that require a long reach. 6.0" 5.3" Length "L" 3. (Cable Entry 4.75" through Mounting Surface or optional conduit coupling) Arc Radius Ø0 for ½ (4) P 6.0" 5.3" Vertical Extension The vertical extension increases the distance be- (Cable...

VertiMax™ Adjustable Pendant Arm VertiMax Options Floorpost 74" or 79" 74" or 79" For use with a post top mount VertiMax arm, the floorpost is a very popular method of mounting an arm when a structural surface is not available. The 74" post is for VertiMax arms and the 79" post is for VertiMax arms with a middle joint extension. Fabricated from heavy wall 6" structural tube welded to a 12" x 12" x 3/8" thick baseplate. A 2½” female NPT coupling near the base for cable entry, additional couplings can be specified or located differently. 3½" OD Tube 6" OD Tube 12.0" 12.0" (79" used for Middle...

VertiMax™ Adjustable Pendant Arm VertiMax Options (continued) Floorpost Accessories Tie-off Kit for Inverted Post A popular method of mounting is to invert a floorpost and attach it to a ceiling structure. To avoid twisting of the structure, it is recommended that diagonal tie-offs are installed. This kit includes (2) sets of clamps that attach to the post and have thru-holes for attaching user-supplied tie-offs between the clamps and ceiling structure. Release Handles Enclosure Handle Standard enclosure handle is supplied with the VertiMax Arm. Arm Handle The arm handle is attached to the...