Stainless Steel Vertica Pendant Arms and Enclosures (NEMA 4X) ™ Vertically Adjustable Mountings for Operator Interfaces • djustable Height A for each operator. • utomatically Locks in Place A when repositioned vertically. • onvenient Grab Handle C unlocks and automatically relocks vertical position. • 3", 23", or 30" 1 of vertical adjustment. • nternal Cable Passageway I sealed and safe. • ersatile Mounting Styles V for any plant floor location: Wall Mount Post Top Machine Top • Arm Extensions include: Horizontal Extension Middle Joint Extension Rigid Wall Mount Extension Vertical Extension • ounterbalances C up to 100 lbs. • recision-sized Enclosures P for any operator interface. • vailable from Stock A in every configuration. • lso Available in A NEMA 4/12 Painted Aluminum/Carbon Steel Vertica arms and enclosures are available for corrosive, sanitary and washdown applications. 425 Caredean Drive · Horsham, PA 19044 · Phone 215.443.3400 · Fax 215.443.3002 ©2005-2014 STRONGARM, Inc. STRONGARM and the STRONGARM logo are registered trademarks of STRONGARM, Inc. All other trademarks are the property of their respective owners.

Vertica Pendant Arms ™ THE industry standard for vertically adjustable mountings V ertical Ranges up to 30" I nstant Adjustability 1 00% Counterbalanced L ocks-in-Place Automatically S ealed Cable Passageway Access cover to Cable Passage Swivel with stop Access cover to Cable Passage Swivel with stop Heavy-duty Stainless Steel Construction Choice of Mounting Post Top Wall Mount (shown) Wall Mount with Coupling Machine Top Industrial Strength Heavy-duty, stainless steel construction makes the Vertica arm ideal for mounting flat panel operator interfaces in demanding plant floor environments. Versatile...

Vertica Pendant Arms ™ Vertica Selection and Articulation Vertica – 13" of Vertical Adjustability Typical Application For ergonomic height adjustment of the display which eliminates the nearly impossible engineering task of mounting the display at “just the right height” to please everyone. Vertica L – 23" of Vertical Adjustability Typical Application Set-up and monitoring where the interface is pulled down for machine set-up and then pushed up and out of the way. Vertica XL – 30" of Vertical Adjustability Typical Application Where the operator can use the same interface from either down on the...

Vertica Pendant Arms ™ Surface Mounting Selection Cabling access opening (2½" NPT) can be used as Alternate Cable Entry. ½", ¾", or 1" NPT adapter caps available as options. Wall Mount A Wall Mount Vertica Arm attaches to a vertical surface with a thru-hole pattern (4) 0.53 ∅. Cables enter through the center of mounting surface. Rotational stops at 180° (±90°) are standard; alternate stops can be specified. Wall Mount with Coupling A Wall Mount Vertica Arm attaches to a vertical surface with a thru-hole pattern (4) 0.53 ∅. Cables enter through the center of mounting surface or the additional...

Vertica Pendant Arms ™ Assembly Configuration Selection Standard Configuration The mounting surface supports the arm and the enclosure is suspended from the arm. This is the most popular configuration. Inverted Configuration The mounting end is inverted, resulting in the arm being suspended from the mounting surface. Inverted post-mounted arms are popular for supporting the arm from the ceiling. Supported Configuration The mounting surface is supporting the arm and the enclosure is supported by the arm. A vertical extension is required for this configuration so that the arm does not come in contact...

Vertica Pendant Arms ™ Horizontal Extension The horizontal extension increases the overall length of the arm. The horizontal extension is inserted between the mounting surface pivot and the Vertica arm. Vertical travel does not change. Swivelto-swivel length is increased by dimension "L". Middle Joint Extension Optional Stacked Middle Joint Configuration The middle joint extension adds a third pivot to the Vertica arm for in/out adjustability. Optional Stacked Middle Joint Configuration

Vertica Pendant Arms (Cable Entry 4.75" through Mounting Surface or optional conduit coupling) Rigid Wall Mount Typically used when there is a mounting surface available but not in the 6.0" ideal location. The rigid wall mount essentially moves the mounting surface. Both length and angle can be specified. These extensions are preferable over horizontal5.3" middle joint 3.50" and extensions for applications that require a long reach. Length "L" (Cable Entry 4.75" through Mounting Surface or optional conduit coupling) Ø 0.53" holes for ½" bolts (4) Places 4.75" (Cable Entry through Mounting Surface...

Middle Joint extension) Vertica Pendant Arms ™ Vertica Options 1½" NPT Female coupling for Cable Entry 1½" NPT Female coupling for Cable Entry Ø 0.56" post top mount For use with afor 1/2" bolts Vertica10.0" the floorpost is a very popular method arm, (4) Places Cable Entry of mounting an arm when a structural surface is not available. The 74" post is for Vertica arms and the 79" post is for Vertica arms with a middle joint extension. Fabricated from heavy wall 3½" structural tube welded to a 12" x 12" x 3/8" thick baseplate. A 1½” female NPT coupling near the base for cable entry, additional...

Vertica Pendant Arms ™ Vertica Options (continued) Floorpost Accessories Tie-off Kit for Inverted Post popular method of mounting is to invert a floorpost and attach it to a ceiling structure. To avoid twisting of the A structure, it is recommended that diagonal tie-offs are installed. This kit includes (2) sets of clamps that attach to the post and have thru-holes for attaching user-supplied tie-offs between the clamps and ceiling structure. Freestanding Floorplate Heavy ¼-thick, reinforced plate used to freestand a floorpost mounted system. Intended for temporary Vertica installations, including...