Catalog excerpts
Vertica Pendant Arms and Enclosures ™ Vertically Adjustable Mountings for Operator Interfaces djustable Height A for each operator. utomatically Locks in Place A when repositioned vertically. onvenient Grab Handle C unlocks and automatically relocks vertical position. 3", 23", or 30" 1 of vertical adjustment. nternal Cable Passageway I sealed and safe. ersatile Mounting Styles V for any plant floor location: Wall Mount Post Top Machine Top ArmExtensions include: Horizontal Extension Middle Joint Extension Rigid Wall Mount Extension Vertical Extension C ounterbalances up to 100 lbs. recision-sized Enclosures P for any operator interface. vailable from Stock A in every configuration. ustom Colors C and finishes available. lso Available in A NEMA 4X Stainless Steel Vertica arms and enclosures are available for corrosive, sanitary and washdown applications. 425 Caredean Drive · Horsham, PA 19044 · Phone 215.443.3400 · Fax 215.443.3002 ©2005 STRONGARM, Inc. STRONGARM and the STRONGARM logo are registered trademarks of STRONGARM, Inc. All other trademarks are the property of their respective owners.
Open the catalog to page 1Vertica Pendant Arms ™ THE industry standard for vertically adjustable mountings Access cover to Cable Passage Heavy-duty Cast-Aluminum Construction Swivel with stop Access cover to Cable Passage Choice of Mounting Post Top Wall Mount (shown) 30" Blind Wall Mount Machine Top I nstant Adjustability 1 00% Counterbalanced L ocks-in-Place Automatically S ealed Cable Passageway Vertical Adjustment with Automatic Lock-in-Place and Gas Spring Counterbalance Swivel with stop Gasketed Mounting Surface Industrial Strength Heavy-duty, cast aluminum construction makes the Vertica arm ideal for mounting...
Open the catalog to page 2Vertica Pendant Arms ™ Vertica Selection and Articulation Vertica – 13" of Vertical Adjustability Typical Application For ergonomic height adjustment of the display which eliminates the nearly impossible engineering task of mounting the display at “just the right height” to please everyone. Swivel 22.3" Top of Travel/Horizontal (15.7" Bottom of Travel) 6.2" (159) 45˚ See Surface Mounting Styles Enclosure Mounting Surface Vertica L – 23" of Vertical Adjustability Typical Application 22.3" Top of Travel/Horizontal Set-up and monitoringBottom of Travel)interface is pulled down for machine...
Open the catalog to page 3Vertica Pendant Arms ™ Surface Mounting Selection Wall Mount A Wall Mount Vertica Arm attaches to a vertical surface with a thru-hole pattern (4) 0.53 ∅. Cables enter through the center of mounting surface or female 2½" NPT access cap opening. Rotational stops at 180° (±90°) are standard; alternate stops can be specified. Cabling access opening (2½" NPT) can be used as Alternate Cable Entry. ½", ¾", or 1" NPT adapter caps available as options. Blind Wall Mount The blind wall mount is simply the wall mount with the thru-hole mounting plate removed. Typically used for a cleaner look on OEM...
Open the catalog to page 4Vertica Pendant Arms ™ Assembly Configuration Selection Standard Configuration The mounting surface supports the arm and the enclosure is suspended from the arm. This is the most popular configuration. Inverted Configuration The mounting end is inverted, resulting in the arm being suspended from the mounting surface. Inverted post-mounted arms are popular for supporting the arm from the ceiling. Supported Configuration The mounting surface is supporting the arm and the enclosure is supported by the arm. A vertical extension is required for this configuration so that the arm does not come in...
Open the catalog to page 5Vertica Pendant Arms ™ Horizontal Extension The horizontal extension increases the overall length of the arm. The horizontal extension is inserted between the mounting surface pivot and the Vertica arm. Vertical travel does not change. Swivelto-swivel length is increased by dimension "L". Middle Joint Extension The middle joint extension adds a third pivot to the Vertica arm for in/out adjustability. Optional Stacked Middle Joint Configuration
Open the catalog to page 6Vertica Pendant Arms ™ Arm Extensions (continued) Rigid Wall Mount Typically used when there is a mounting surface available but not in the ideal location. The rigid wall mount essentially moves the mounting surface. Both length and angle can be specified. These extensions are preferable over horizontal and middle joint extensions for applications that require a long reach. 6.0" 5.3" (Cable Entry 4.75" through Mounting Surface or optional conduit coupling) (Cable Entry 4.75" through Mounting Surface or optional conduit coupling) Ø 0.53" holes for ½" bolts (4) Places Vertical Extension 4.75"...
Open the catalog to page 7Vertica Pendant Arms ™ Vertica Options Floorpost For use with a post top mount Vertica arm, the floorpost is a very popular method of mounting an arm when a structural surface is not available. The 74" post is for Vertica arms and the 79" post is for Vertica arms with a middle joint extension. Fabricated from heavy wall 3½" structural tube welded to a 12" x 12" x 3/8" thick baseplate. A 1½” female NPT coupling near the base for cable entry, additional couplings can be specified or located differently. (79" used for Middle Joint (79" used for Middle Jointextension) extension) 1½" NPT Ø 0.56"...
Open the catalog to page 8Vertica Pendant Arms ™ Vertica Options (continued) Floorpost Accessories Tie-off Kit for Inverted Post popular method of mounting is to invert a floorpost and attach it to a ceiling structure. To avoid twisting of the A structure, it is recommended that diagonal tie-offs are installed. This kit includes (2) sets of clamps that attach to the post and have thru-holes for attaching user-supplied tie-offs between the clamps and ceiling structure. Heavy ¼-thick, reinforced plate used to freestand a floorpost mounted system. Intended for temporary Vertica Freestanding Floorplate installations,...
Open the catalog to page 9All Strongarm catalogs and technical brochures
-
STRONGARM VulcanView
4 Pages
-
STRONGARM Vulcan
4 Pages
-
STRONGARM B-Series PC
1 Pages
-
MightyMount
6 Pages
-
Product Brochures
48 Pages
-
Remote Terminal Station
2 Pages
-
Roundtop MiniStation
2 Pages
-
STRONGARM CleanMount
2 Pages
-
STRONGARM VertiMax
8 Pages
-
STRONGARM TC160
1 Pages
-
STRONGARM TD PC
1 Pages
-
STRONGARM D7 PC
1 Pages