Distal Targeting System Trauma This document is intended solely for the use of healthcare professionals. A surgeon must always rely on his or her own professional clinical judgment when deciding whether to use a particular product when treating a particular patient. We do not dispense medical advice and recommends that surgeons be trained in the use of any particular product before using it in surgery. The information presented is intended to demonstrate Stryker’s products. A surgeon must always refer to the package insert, product label and/or instructions for use, including the instructions for cleaning and sterilization (if applicable), before using any of Stryker’s products. Products may not be available in all markets because product availability is subject to the regulatory and/or medical practices in individual markets. Please contact your representative if you have questions about the availability of Stryker’s products in your area. Stryker Corporation or its affiliates own, use, or have applied for the following trademarks or service marks: Gamma3, Stryker. All other trademarks are trademarks of their respective owners or holders. Manufacturer: Stryker Trauma GmbH Prof.-Küntscher-Str. 1–5, 24232 Schönkirchen, Germany stryker.com Content ID: G3-BR-2_Rev-1, 05-2018 Copyright © 2018 Stryker

Distal Targeting System May provide more surgical working space1 The Gamma3 DTS allows you to perform the distal locking procedure in the Oblique approach, allowing the image intensifier to not be in the same axis of the power tool and drill. The major components of the Distal Targeting System are made of Carbon Fiber allowing for radiolucency during C-Arm imaging. Minimal invasive surgery Guided distal locking may help to find the correct locking position with the first approach. Without performing repeated drilling, it helps to potentially achieve minimal invasive surgery. The Gamma3 Distal...