Advancing meaningful innovation is Ordering Information and Product Numbers 5400-700-000 5400-704-000 5400-702-000 5400-701-000 5400-703-000 5400-750-000 Mill Instrument Driver one of the ways we make a difference at Stryker. The Mill is an innovative electronic bone mill designed to enable The Mill The Mill Cable Fine Blade, 3.2mm (5/pkg) Medium Blade, 5.0mm (5/pkg) Coarse Blade, 8.0mm (5/pkg) uniform and consistent bone yield. Products referenced with TM designation are trademarks of Stryker.Products referenced with ® designation are registered trademarks of Stryker. The information presented in this brochure is intended to demonstrate the breadth of Stryker product offerings. Always refer to the package insert, product label and/or user instructions before using any Stryker product. Products may not be available in all markets. Product availability is subject to the regulatory or medical practices that govern individual markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area. Literature Number: 9100-008-019 Rev. B UnDe/P.S. Copyright © 2011 Stryker Printed in USA Stryker® Neuro Spine ENT 4100 East Milham Avenue Kalamazoo, MI 49001 USA t: 269 323 7700 f: 269 353 3026 toll free: 800 253 3210 www.stryker.com

• Blades are designed for a milled bone yield for better consistency and uniformity • Single pass cutting action enables uniform particulate size with low temperature bone exposure • Multiple blade sizes allow for customized bone granulation for a wider range of procedures • Collection tray minimizes bone loss through mill cycle • Preassembled blades allow for maximum efficiency during set-up and operation Mill Instrument Driver Independent console for use with pneumatic system Fine Blade 5400-702-000 Bone particulate up to 3.2mm CORE Console Powers multiple instruments simultaneously including...